Codice:
Texas Instruments X-Loader 1.41 (Mar 30 2012 - 11:31:59)
Starting OS Bootloader from NOR ...
U-Boot 1.3.41077437-dirty (Oct 3 2012 - 17:18:30)
OMAP3630-HS rev 2, CPU-OPP2 L3-200MHz
OMAP3630 Strasbourg 1.3 Version + mDDR (Boot MMC)
DRAM: 512 MB
Using default environment
In: serial
Out: serial
Err: serial
[APTS Logo/]
## Executing script at 80a25a20
get_format
-------- 1 --------
## Executing script at 80a25ddc
get_format
-------- 1 --------
Using device mmc0, partition 2
Loading from block device mmc device 0, partition 2: Name: xxa2
Type: U-Boot File:/uboot.conf
** File not found /uboot.conf
'uboot.conf' ignored
Hit any key to stop autoboot: 0
## Executing script at 80a257d8
get_format
-------- 1 --------
Not executing bootloader applet
Loaded device-tree at address 83300000 of length 2616 bytes
Using device mmc0, partition 2
Loading from block device mmc device 0, partition 2: Name: xxa2
Type: U-Boot File:/zImage
2584680 bytes read
Boot with gzipped Image
Verifying device tree...
libfdt fdt_setprop() failed
Verifying executable image signature ...
Starting kernel ...
Resetting boot powerdown watchdog
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.9 (svc_quickbuild@nlsrvup-qbs08) (gcc version 4.3.3 (TomTom CipherWizardry 2009q1_203-474426) ) #2 PREEMPT Wed May 29 11:06:08 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Strasbourg A2
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] factory data: bootmem reserved successful
[ 0.000000] DIE ID: 118C0002FE380000015EEBD90501901A
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] omap_sam_base (VA) == 0xfe40f000
[ 0.000000] omap_sram_start (PA) == 0x4020f000
[ 0.000000] omap_sram_size (SIZE) == 0x1000
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] Reserving 3145728 bytes SDRAM for VRAM
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 console=ttyO2,115200 androidboot.console=ttyO2 sysboot_mode=cold init=/init videoout=omap24xxvout vram=0x300000,0x83000000 lpj=2334720 brick=0
[ 0.000000]
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 504064KB available (4304K code, 1106K data, 492K init, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0083000 ( 492 kB)
[ 0.000000] .text : 0xc0083000 - 0xc04b7000 (4304 kB)
[ 0.000000] .data : 0xc04d2000 - 0xc0518d60 ( 284 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:402
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] Reprogramming SDRC clock to 400000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop (skipped) preset value.. 597.64 BogoMIPS (lpj=2334720)
[ 0.000000] Security Framework initialized
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] vgpio vgpio.0: pin #403 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: pin #412 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: pin #413 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: pin #415 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: pin #423 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: pin #458 is tagged as not connected!
[ 0.000000] vgpio vgpio.0: registered 59 GPIOs (@400)
[ 0.000000] Strasbourg_tvp515x: Driver registration Starting
[ 0.000000] Strasbourg_tvp515x: Driver registration complete
[ 1.390869] OMAP DMA hardware revision 5.0
[ 1.390930] Reserving DMA channels 0 and 1 for HS ROM code
[ 1.391937] offenburg::flipflop: Registered
[ 1.392333] omap_vout: Driver registration starting
[ 1.411132] bio: create slab <bio-0> at 0
[ 1.413055] SCSI subsystem initialized
[ 1.415679] usbcore: registered new interface driver usbfs
[ 1.415924] usbcore: registered new interface driver hub
[ 1.416168] usbcore: registered new device driver usb
[ 1.416595] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
[ 1.441986] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 1.442016] twl4030: power (irq 373) chaining IRQs 376..383
[ 1.442382] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 1.444244] vgpio vgpio.1: pin #600 is tagged as not connected!
[ 1.444396] vgpio vgpio.1: pin #602 is tagged as not connected!
[ 1.444641] vgpio vgpio.1: registered 5 GPIOs (@600)
[ 1.445709] regulator: VUSB1V5: 1500 mV normal standby
[ 1.446166] regulator: VUSB1V8: 1800 mV normal standby
[ 1.446594] regulator: VUSB3V1: 3100 mV normal standby
[ 1.448333] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 1.449188] regulator: VMMC1: 3000 mV normal standby
[ 1.449645] regulator: VDAC: 1800 mV normal standby
[ 1.450561] regulator: VAUX2: 1800 mV normal standby
[ 1.451019] regulator: VDVI: 1800 mV normal standby
[ 1.451934] regulator: VAUX1: 3000 mV normal standby
[ 1.452911] regulator: VAUX3: 1800 mV normal standby
[ 1.453094] i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz
[ 1.453582] i2c_omap i2c_omap.3: bus 3 rev4.0 at 50 kHz
[ 1.454193] LinuxPPS API ver. 1 registered
[ 1.454193] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.455871] Bluetooth: Core ver 2.15
[ 1.456115] NET: Registered protocol family 31
[ 1.456146] Bluetooth: HCI device and connection manager initialized
[ 1.456146] Bluetooth: HCI socket layer initialized
[ 1.961791] Switching to clocksource 32k_counter
[ 1.964508] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
[ 1.964569] musb_init_controller: doing clk_get
[ 1.964721] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
[ 1.965118] NET: Registered protocol family 2
[ 1.965240] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.965454] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.965881] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 1.966186] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.966217] TCP reno registered
[ 1.966308] NET: Registered protocol family 1
[ 1.973419] dspbridge_init: 600000 bytes @ 80a00000
[ 1.975097] Strasbourg: power supply driver loaded
[ 1.975311] omap-iommu omap-iommu.0: isp registered
[ 1.976104] iovmm-omap initialized isp, major: 252, base-minor: 0
[ 1.976715] fdtexport driver, (c) 2009 TomTom BV
[ 1.977416] ttcrypto: found version 1 tt_crypto context
[ 1.991088] ashmem: initialized
[ 1.991424] msgmni has been set to 985
[ 1.992340] alg: No test for stdrng (krng)
[ 1.992401] io scheduler noop registered (default)
[ 2.047912] OMAP DSS rev 2.0
[ 2.047973] OMAP DISPC rev 3.0
[ 2.048034] OMAP VENC rev 2
[ 2.048370] OMAP DSI rev 1.0
[ 2.066467] Loop count exceeded in check SR I2C write
[ 2.067687] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 2.068206] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 2.068572] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 2.757598] console [ttyO2] enabled
[ 2.761505] Hiding boot partition 0...
[ 2.767150] mmc0: new high speed MMC card at address 0001
[ 2.773956] mmcblk0: mmc0:0001 M2G1HF 1.86 GiB
[ 2.780364] mmcblk0: p2
[ 2.786499] loop: module loaded
[ 2.792358] PPP generic driver version 2.4.2
[ 2.797332] PPP Deflate Compression module registered
[ 2.802795] PPP BSD Compression module registered
[ 2.807769] tun: Universal TUN/TAP device driver, 1.6
[ 2.813079] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.819915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.828460] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.834564] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.842529] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.860382] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.867065] usb usb1: configuration #1 chosen from 1 choice
[ 2.873382] hub 1-0:1.0: USB hub found
[ 2.877441] hub 1-0:1.0: 3 ports detected
[ 2.985351] ehci-omap ehci-omap.0: Resetting the 5V75 VBUS line...
[ 3.040557] usbcore: registered new interface driver cdc_acm
[ 3.046508] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.055511] Initializing USB Mass Storage driver...
[ 3.061065] usbcore: registered new interface driver usb-storage
[ 3.067443] USB Mass Storage support registered.
[ 3.072570] usbcore: registered new interface driver libusual
[ 3.079071] usbcore: registered new interface driver usbserial
[ 3.085235] usbserial: USB Serial Driver core
[ 3.090057] USB Serial support registered for GSM modem (1-port)
[ 3.096679] usbcore: registered new interface driver option
[ 3.102539] option: v0.7.2:USB Driver for GSM modems
[ 3.107971] USB Serial support registered for Sierra USB modem
[ 3.114318] usbcore: registered new interface driver sierra
[ 3.120239] sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
[ 3.127227] usbcore: registered new interface driver usb_ehset_test
[ 3.134185] android_register_function acm
[ 3.140350] using rtc device, twl_rtc, for alarms
[ 3.145294] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 3.152130] twl_rtc twl_rtc: Power up reset detected.
[ 3.158111] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 3.163452] i2c /dev entries driver
[ 3.170501] Linux video capture interface: v2.00
[ 3.177001] omap-previewer omap-previewer: omap-previewer: Registered preview wrapper
[ 3.186859] omap3isp omap3isp: Revision 15.0 found
[ 3.192047] omap-iommu omap-iommu.0: isp: version 1.1
[ 3.201599] OMAP hwmon driver
[ 3.207458] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 3.214660] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.223632] Bluetooth: HCI UART driver ver 2.2
[ 3.228332] Bluetooth: HCI H4 protocol initialized
[ 3.233367] Bluetooth: HCI BCSP protocol initialized
[ 3.238586] Bluetooth: HCILL protocol initialized
[ 3.243560] cpuidle: using governor ladder
[ 3.247863] cpuidle: using governor menu
[ 3.253631] usbcore: registered new interface driver usbhid
[ 3.259582] usbhid: v2.6:USB HID core driver
[ 3.264831] logger: created 64K log 'log_main'
[ 3.269897] logger: created 256K log 'log_events'
[ 3.275146] logger: created 64K log 'log_radio'
[ 3.280151] logger: created 64K log 'log_system'
[ 3.285614] CSR_BC: csr-bc: Probing CSR BlueCore mode driver.
[ 3.292388] tomtom-gps Driver: Probed.
[ 3.296325] gps: device registration: name="offenburg"
[ 3.302124] tomtom-gps Driver: Registering rfkill for GPS.
[ 3.308135] tomtom-gps Driver: Initialized.
[ 3.312744] flipflop driver, (c) 2009 TomTom BV
[ 3.317810] TomTom CAN-Microprocessor Driver, (C) 2008 TomTom BV
[ 3.325408] new PPS source tomtom-pps at ID 0
[ 3.330108] tomtom-pps tomtom-pps: successfully registered pps source at 0.
[ 3.337646] tomtom-pps: successfully registered driver.
[ 3.343139] suicide_alarm driver, (c) 2011 TomTom BV
[ 3.348937] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 3.356353] ALSA device list:
[ 3.359466] No soundcards found.
[ 3.363128] Netfilter messages via NETLINK v0.30.
[ 3.368194] nf_conntrack version 0.5.0 (7882 buckets, 31528 max)
[ 3.374755] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 3.382568] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 3.390899] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 3.397521] ctnetlink v0.93: registering with nfnetlink.
[ 3.403320] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.409057] TCP cubic registered
[ 3.412475] NET: Registered protocol family 17
[ 3.417205] Bluetooth: L2CAP ver 2.14
[ 3.421051] Bluetooth: L2CAP socket layer initialized
[ 3.426391] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.431152] Bluetooth: SCO socket layer initialized
[ 3.436492] Bluetooth: RFCOMM TTY layer initialized
[ 3.441680] Bluetooth: RFCOMM socket layer initialized
[ 3.447113] Bluetooth: RFCOMM ver 1.11
[ 3.451049] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.456665] Bluetooth: BNEP filters: protocol multicast
[ 3.462188] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.469024] Power Management for TI OMAP3.
[ 3.475189] Unable to Changelevel for resource vdd1_opp to 0
[ 3.481201] Error: could not refresh resources
[ 3.486450] SR: Nvalues not fused for 1.2G, disabled
[ 3.491668] SR: Nvalues not fused for 1G, disabled
[ 3.496795] SR2:Fused Nvalues for VDD1OPP3 11193534
[ 3.501953] SR2:Fused Nvalues for VDD1OPP2 10126585
[ 3.507080] SR2:Fused Nvalues for VDD1OPP1 10082000
[ 3.512207] sr1_opp_margin[1]=37500
[ 3.515869] sr1_opp_margin[2]=37500
[ 3.519561] sr1_opp_margin[3]=37500
[ 3.523223] steps added, volt will be recaliberated automatically
[ 3.529663] SR2:Fused Nvalues for VDD2OPP1 99f2eb
[ 3.534637] SR2:Fused Nvalues for VDD2OPP2 10066063
[ 3.539794] SmartReflex driver initialized
[ 4.865386] clock: dpll2_ck failed transition to 'bypassed'
[ 4.919281] at24 3-0050: 8192 byte at24 EEPROM (writable)
[ 4.928222] input: TSC2007 Touchscreen as /devices/virtual/input/input0
[ 4.935974] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 4.945037] DMA transaction error with device 0
[ 4.950378] OMAP DISPCONTROL read (stallmode)0
[ 4.955108] OMAP DISPCONTROL read (gpout)1
[ 4.959381] OMAP DISPCONTROL read (stallmode)1
[ 4.964721] DPI set dsi clk
[ 5.110778] DPI set dsi clk
[ 5.123504] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[ 5.131378] regulator_init_complete: incomplete constraints, leaving VAUX1 on
[ 5.139038] regulator_init_complete: incomplete constraints, leaving VAUX2 on
[ 5.148986] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 5.157836] omap3 omap3isp CSI memvs initted
[ 5.163146] Registered led device: lcd-backlight
[ 5.168304] Freeing init memory: 492K
[APTS InitRamFS]
TOMTOM initramfs compiled on May 29 2013 11:04:56
initramfs: BOOTMODE: cold
AUTOTEST: root=/dev/mmcblk0p2
initramfs: Checking filesystem on: /dev/mmcblk0p2
Opening the watchdog...
Kicking the watchdog... (3)
/dev/mmcblk0p2: recovering journal
/dev/mmcblk0p2: Superblock last mount time is in the future. FIXED.
/dev/mmcblk0p2: clean, 2246/122400 files, 104805/488416 bl[ 7.011779] omap_wdt: Unexpected close, not stopping!
ocks
initramfs: fsck returned: 0
initramfs: Attempti[ 7.021881] kjournald starting. Commit interval 5 seconds
ng to mount /dev/mmcblk0p2 on /internalstorage...
initramfs: [ 7.033050] EXT3 FS on mmcblk0p2, Trying to mount internal journal
/dev/mmcblk0p2 a[ 7.040832] EXT3-fs: mounted filesystem with ordered data mode.
s ext3 (options=barrier=1)
initramfs: Checking for system update from directory[ 7.054595] signedloop: using 76866 data pages, 377 L0 pages and 2 L1 pages
data/ttcontent/common/installed.
initramfs: Failed to stat zImage due to No such file or directory.
initramfs: Checking for system update from directory data/ttcontent.
initramfs: Failed to stat zImage due to No such file or directory.
initramfs: Setting up loop device /dev/loop0 using rootfs.img
initramfs: Creating root filesystem...
initramfs: Trying to mount /dev/loop0 as squashfs (options=none)
[ 7.116546] signedloop: activated hash checking on device loop0
initramfs: Trying to mount /dev/loop0 as ext3 (options=barrier=1)
[ 7.130493] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.136749] kjournald starting. Commit interval 5 seconds
AUTOTEST: NAVCORE starting
[ 7.151153] omap_wdt: Unexpected close, not stopping!
initramfs: Checking CAN firmware
[ 7.169647] Process /system/bin/can_firmware_tool requested an executable stack, ignoring...
can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/mfd_can_app1.img
can_swl: File /system/ttdaemon/can_micro_fir[ 7.229034] omap_wdt: Unexpected close, not stopping!
mware/mfd_can_app1.img not available, try the backward compatible file /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img.
can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img
can_swl: DoCanMicroVersionCheck: bootloader:1177652->0 application:1177652->1177652
can_swl: There is no desired CAN micro bootloader SW version. The CAN micro bootloader SW upgrade mechanism is blocked.
can_swl: Actual CAN micro application SW version is as desired: 1177652
initramfs: can firmware matches
initramfs: Checking EOL settings
initramfs: EOL s[ 7.439331] omap_wdt: Unexpected close, not stopping!
ettings: CONFIGURED
[/APTS InitRamFS]
AUTOTEST: starting init
[ 7.772521] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 8.050537] Process /system/bin/fortytwo requested an executable stack, ignoring...
[ 8.578277] No device for DAI BC6
[ 8.668670] proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
[ 8.676116] omap mailbox rev 4.0
[ 8.682373] proc_start: dsp in running state
[ 8.687194] procwrap_detach: deprecated dspbridge ioctl
[ 8.698944] No device for DAI omap-mcbsp-dai-0
[ 8.704040] No device for DAI omap-mcbsp-dai-1
[ 8.708862] No device for DAI omap-mcbsp-dai-2
[ 8.714385] No device for DAI omap-mcbsp-dai-3
[ 8.719085] No device for DAI omap-mcbsp-dai-4
[ 8.801971] No device for DAI twl4030
[ 8.806121] No device for DAI twl4030 Voice
[ 8.810607] No device for DAI twl4030 Clock
[ 8.921630] No device for DAI UDA1334
[ 9.001617] Strasbourg SoC init
[ 9.008483] TWL4030 Audio Codec init
[ 9.014129] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 9.020324] asoc: BC6 <-> omap-mcbsp-dai-2 mapping ok
[ 9.132324] UDA1334 Audio Codec 0.1
[ 9.136566] asoc: UDA1334 <-> omap-mcbsp-dai-1 mapping ok
[ 9.455963] usbcore: registered new interface driver snd-usb-audio
[ 9.646820] Video decoder chip id 5151 detected!
[ 9.666351] Registered tvp5150 video decoder
[ 9.746856] omap_vout: registered and initialized video device 3 [v4l2]
[ 9.920623] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.927612] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[ 9.934906] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
[ 9.942993] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
[ 10.055938] usb usb2: configuration #1 chosen from 1 choice
[ 10.062408] hub 2-0:1.0: USB hub found
[ 10.071594] hub 2-0:1.0: 3 ports detected
[ 10.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)...
[ 10.263977] omapflash: Found 1 x16 devices at 0x0 in 16-bit bank
[ 10.270996] Intel/Sharp Extended Query Table at 0x0039
[ 10.276641] Intel/Sharp Extended Query Table at 0x0039
[ 10.282104] Intel/Sharp Extended Query Table at 0x0039
[ 10.287658] Intel/Sharp Extended Query Table at 0x0039
[ 10.293212] Intel/Sharp Extended Query Table at 0x0039
[ 10.298767] Intel/Sharp Extended Query Table at 0x0039
[ 10.304321] Using auto-unlock on power-up/resume
[ 10.309295] cfi_cmdset_0001: Erase suspend on write enabled
[ 10.315917] cmdlinepart partition parsing not available
[ 10.321502] Creating 1 MTD partitions on "omapflash":
[ 10.326782] 0x000000000000-0x000000400000 : "nor_part0"
[ 10.344787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)...
[ 10.594757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)...
[ 10.844757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)...
[ 11.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)...
[ 11.240936] input: MSM-keypad as /devices/virtual/input/input1
[ 11.249267] input: CSW-keypad as /devices/virtual/input/input2
[ 11.817779] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c
[ 12.720703] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[/APTS Android started][ 20.658660] request_suspend_state: wakeup (3->0) at 19314056442 (2000-01-01 00:00:17.009674064 UTC)
[ 27.700958] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c
[ 28.014892] OMAP DISPCONTROL read (stallmode)0
[ 28.026184] OMAP DISPCONTROL read (gpout)1
[ 28.052947] OMAP DISPCONTROL read (stallmode)1
[ 28.066070] DPI set dsi clk
[ 28.243804] DPI set dsi clk
Nella 
Rispondi Citando
Segnalibri