Decoder DM800se v2 - TrialTuner 2.0b Driver Compiled by Bobsilvio
TrialTuner Driver 2.0b for DM800se v2
Compiled by Bobsilvio
Thanks PRZ_Team for source code
Istruzioni
1) Scaricare il file e inserirlo nella cartella /tmp/ del vostro dm800sev2
Poi con Telnet
2) Digitare i seguenti comandi in sequenza:
- opkg install --force-overwrite /tmp/*ipk
- chmod 755 /etc/init.d/trialtuner
- chmod 755 /etc/rcS.d/S50trialtuner
3) Riavviare il box
Download
Code:
https://mega.co.nz/#!lgJ2UZAL!8FIF6E8nE_E_dxxUSBTmL4y8F1qrk9yxhgXoecJ 1dOA
Changelog
Code:
TrialTuner Changelog
2.0.0b
- Upgraded driver to new kernel version (3.2)
- Supported for openembedded 1.6 and openembedded 2.0
- Fixed usbtuner and vtuner (now they works without any wrapper!)
[KNOWN ISSUES]
- Decoder freezes when changing channel on other tuner during registrations. No solutions. Only
locks are available on Enigma2 gui, not managed from driver.
1.0.4b
- Fixed FEC capabilities on DVB-C tuner. Works with dvbapi 5 (but not new openpli with full dvbapi 5 migration).
- Using HP code-rate of DVB-T parameters for QPSK inner FEC.
- Fixed usbtuner e vtuner using appropriate wrapper (few days for their releasing).
- Switch from DVB_ALGO_HW to DVB_ALGO_SW on dvbapi for tuning software support.
[TODO]
- Build new driver versions with full dvbapi 5 support.
[KNOWN ISSUES]
- Enigma2 crashes on some DVB-T channel (ex. Rete4) with Vhannibal DVB-T settings.
It may be fixed doing an automatic scan on DVB-T tuner without deleting current channels.
- Decoder freezes when changing channel on other tuner during registrations. No solutions. Only
locks are available on Enigma2 gui, not managed from driver.
1.0.3b:
- Fixed video reproducing of hdd recorded
- Fixed tuning DVB-S frequency when switching from VHF DVB-T frequency.
- Fixed channel switching from dvb-c/t to dvb-s (some times failed to tune)
- Fixed the qam256 frequency from cable (set FEC to 7/8) (thanks to gjstroom for test and support)
[KNOWN ISSUES]
- Decoder freeze when change channel on other tuner during registrations. No solutions. Only
locks ara available on Enigma2 gui, not managed from driver.
- usbtuner and vtuner still don't work. There are some problems with demux support. They must be fixed.
[NOTE]
- Unfortunately this trialtuner is only a software driver. It's not possible to view, for example, dvb-s while recording dvb-t.
The hardware tuner is a combo, not a real multi-frontends.
1.0.2b:
- Fixed tuning of VHF frequency of DVB-T.
[KNOWN ISSUES]
- usbtuner and vtuner don't work now. They must be fixed.
1.0.1b:
- First driver release.
[TODO]
- DVB-C must be tested
[KNOWN ISSUES]
- VHF frequency of DVB-T can't be tuning.
- usbtuner and vtuner don't work now. They must be fixed.
###########################
1) Scaricare il file e inserirlo nella cartella /tmp/ del vostro dm800sev2
Poi con telnet
2) Digitare i seguenti comandi in sequenza:
- opkg install --force-overwrite /tmp/*ipk
- rm /etc/rcS.d/S50trialtuner
- ln -s /etc/init.d/trialtuner /etc/rcS.d/S50trialtuner
- chmod 755 /etc/init.d/trialtuner
- chmod 755 /etc/rcS.d/S50trialtuner
3) Riavviare il box
Rispondi Citando
Segnalibri