Renault R-LINK (R-LINK 1)

Visualizzazione Stampabile

29-04-2018, 08:31
bovirus

Renault R-LINK (R-LINK 1)

- Cos'è R-Link

R-LinK è il sistema di info/entraitanment installato su alcuni veicoli Renault.

Nel sito Renault molte pagine web sono associate sia a R-LINk che a R-LINK Evolution.
R-LINk e R-LINK Evolution sono due sistemi diversi con software diverso.

Per R-LINK Evolution esiste uno specifico thread.

R-LINK Evolution - Thread dedicato

- Veicoli equipaggiati con R-Link

R-LINK Evolution - Veicoli equipaggiati

TWINGO
Nuova CLIO
Nuova CAPTURE
Nuovo CLIO Sporter
Nuova Grand SCENIC
Nuovo KANGOO ZE
Nuova ZOE
KANGOO EXPRESS
TRAFIC Trasporto Persone
KANGOO
TRAFIC

- Informazioni generali e supporto

R-LINK - Caratteristiche

R-LINK - Aiuto, supporto e comande frequenti (FAQ)

R-LINK - Verifica compatibilità telefono

- Manuali

R-LINK - Manuale completo (PDF)

R-LINK - Compatibilità telefoni (PDF)

R-LINK - Manuale sintetico (PDF)

- Verifica versione R-Link installata

Menu -> Sistema -> Stato e informazioni - Freccia destra -> Informazioni versione -> L'info è nella riga Applicazione

R-LINK Evolution - Verifica versione

Tramite l'applicazione R-Link è possibile aggiornare solitamente le sole mappe del TomTom.

L'aggiornamento del sistema R-LINK Evolution (Android Auto) non può essere fatto dall'utente ma solo dalle officine Renault. Il servizio è gratuito.

- My Renault

My Renault è il portale da cui previa registrazione è possibile accedere a vari servizi relativi al veicolo tra cui anche

- Scaricare l'applicazione R-LINK necessaria per l'aggiornamento del TomTom installato nel veicolo.
- Scaricare, tramite l'applicazione R-LINK, gli aggiornamenti delle mappe TomTom (quando disponibili e abilitati al download)

My Renault - Accesso

Per la prima registrazione è necessario selezionare Iscriviti a My Renault e inserire

Nome / Cognome / Indirizzo email / password scelta per l'accesso

- Aggiornamenti navigatore

La politica degli aggiornamenti TomTom ossia

- Tempo max (dal ritiro del veicolo) primo aggiornamento gratuito

- Eventuali aggiornamenti gratuiti successivi al primo

varia da veicolo a veicolo e può essere verificata o sulla domentazione fornita con il veicolo, o contattando l'assistenza clienti fornendo oltre ai propri dati anche targa e numero di telaio del veicolo, o accedendo al portale My Renault nella sezione "Prodotti" collegata al proprio veicolo.

Assistenza clienti Renault

- R-LINK Toolbox

R-LINK Toolbox è il software per il download e l'applicazioen degli aggiornamenti del sistema R-LINK.

R-LINK Toolbox / R-LINK2 Toolbox - Pagina download

R-LINK Toolbox (Windows)
R-LINK Toolbox (Mac)

- Aggiornamenti con R-LINK Toolbox

Per scaricare ed applicare gli aggiornamenti sono necessari

- La scheda SD originale Renault
- Un lettore di schede MicroSD per computer
- Un computer con sistema operativo Windows
- Una connessione internet
- Il software R-LINK Toolbox
- Aver efefttuato la registrazione al sito My Renault

- Rimozione scheda SD dall'auto

Importante!!!!

Per rimuovere la scheda SD dall'auto è importante non estrarre la scheda SD fino a che non siano stati fatti i seguenti passaggi

Menu -> Sistema e quindi nella seconda pagina selezionare Rimuovi la SD card

- Aggiornamento sofwtare scheda SD con R-LINK Toolbox

- Inserire la scheda nel lettroe SD collegato al PC.
- Verificare che al scheda SD venga riconsociuta dal PC.
- Inserisci la SD card per R-LINK nel lettore del computer.
- Dovrebbe aprirsi il software R-LINK Toolbox. In caso contrario, lancia il software.
- Accedi al tuo account MY Renault ed entra nella sezione "Aggiornamento" del sistema R-LINK Store, per verificare se vi sono aggiornamenti di sistema disponibili.
- In caso affermativo, clicca su "Aggiorna". Consiglio: Se ti vengono proposti contemporaneamente un aggiornamento di sistema e un aggiornamento di versione delle mappe, scarica l'aggiornamento delle mappe soltanto dopo avere installato l'aggiornamento di sistema su R-LINK del veicolo Renault.
- Ritorna al software R-LINK Toolbox e clicca su "Lancia download".
- Attendi che il software R-LINK Toolbox confermi il completamento del download sulla scheda SD R-LINK.
- Una volta completato il download degli aggiornamenti chiudi R-LINK Toolbox.
- Estrai la scheda SD dal lettore collegato al PC.

- Appliaczione aggiornamenti in auto

Importante!!!!
Gli aggiornamenti vanno sempre effettuati con motore in moto e auto ferma.

- Accendere il motore e auto ferma.
- Inserire nell'auto la scheda SD con gli aggiornamenti scaricati con R-LINK Toolbox.
- Partirà un processo di aggiornamento.
- Durante l'installazione dell'aggiornamento il sistema R-LINK può rimanere inattivo e riavviarsi: non rimuovere la SD card.
- Importante: fino a completamento dell'aggiornamento NON spegnere il motore e NON estrarre la scheda SD.

Aggironamento con R-LINK Toolbox

- Pellicola protezione display

Pellicola protezione display anti graffio (Amazon)

..
28-07-2022, 15:03
Mnkach

Alcune informazioni interessanti.

R-LINK è riconosciuto dal computer quando è collegato tramite il miniUSB estremo (bianco).
ADB non lo vede (probabilmente il debug USB è proibito).
Sembra che il dispositivo sia in qualche modo simile al Tomtom Bridge

TomTom Bridge

Ecco cosa ho ottenuto quando mi sono connesso:

Codice:

$ lsusb -v Bus 001 Device 005: ID 1390:d108 TOMTOM B.V. MFD Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1390 TOMTOM B.V. idProduct 0xd108 bcdDevice 2.16 iManufacturer 1 TomTom International B.V. iProduct 2 MFD iSerial 3 08160002DA180000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0009 bNumInterfaces 0 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered
29-07-2022, 09:40
Mnkach

Il dispositivo utilizza un processore OMAP3630. È disponibile una scheda tecnica.
UART è disponibile nel dispositivo.
Scarica registro:

Codice:

Texas Instruments X-Loader 1.41 (Mar 30 2012 - 11:31:59) Starting OS Bootloader from NOR ... U-Boot 1.3.41077437-dirty (Oct 3 2012 - 17:18:30) OMAP3630-HS rev 2, CPU-OPP2 L3-200MHz OMAP3630 Strasbourg 1.3 Version + mDDR (Boot MMC) DRAM: 512 MB Using default environment In: serial Out: serial Err: serial [APTS Logo/] ## Executing script at 80a25a20 get_format -------- 1 -------- ## Executing script at 80a25ddc get_format -------- 1 -------- Using device mmc0, partition 2 Loading from block device mmc device 0, partition 2: Name: xxa2 Type: U-Boot File:/uboot.conf ** File not found /uboot.conf 'uboot.conf' ignored Hit any key to stop autoboot: 0 ## Executing script at 80a257d8 get_format -------- 1 -------- Not executing bootloader applet Loaded device-tree at address 83300000 of length 2616 bytes Using device mmc0, partition 2 Loading from block device mmc device 0, partition 2: Name: xxa2 Type: U-Boot File:/zImage 2584680 bytes read Boot with gzipped Image Verifying device tree... libfdt fdt_setprop() failed Verifying executable image signature ... Starting kernel ... Resetting boot powerdown watchdog [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.9 (svc_quickbuild@nlsrvup-qbs08) (gcc version 4.3.3 (TomTom CipherWizardry 2009q1_203-474426) ) #2 PREEMPT Wed May 29 11:06:08 CEST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Strasbourg A2 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] factory data: bootmem reserved successful [ 0.000000] DIE ID: 118C0002FE380000015EEBD90501901A [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] omap_sam_base (VA) == 0xfe40f000 [ 0.000000] omap_sram_start (PA) == 0x4020f000 [ 0.000000] omap_sram_size (SIZE) == 0x1000 [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Reserving 3145728 bytes SDRAM for VRAM [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 console=ttyO2,115200 androidboot.console=ttyO2 sysboot_mode=cold init=/init videoout=omap24xxvout vram=0x300000,0x83000000 lpj=2334720 brick=0 [ 0.000000] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 504064KB available (4304K code, 1106K data, 492K init, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0083000 ( 492 kB) [ 0.000000] .text : 0xc0083000 - 0xc04b7000 (4304 kB) [ 0.000000] .data : 0xc04d2000 - 0xc0518d60 ( 284 kB) [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:402 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] Reprogramming SDRC clock to 400000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop (skipped) preset value.. 597.64 BogoMIPS (lpj=2334720) [ 0.000000] Security Framework initialized [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Initializing cgroup subsys freezer [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] regulator: core version 0.5 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] vgpio vgpio.0: pin #403 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #412 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #413 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #415 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #423 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #458 is tagged as not connected! [ 0.000000] vgpio vgpio.0: registered 59 GPIOs (@400) [ 0.000000] Strasbourg_tvp515x: Driver registration Starting [ 0.000000] Strasbourg_tvp515x: Driver registration complete [ 1.390869] OMAP DMA hardware revision 5.0 [ 1.390930] Reserving DMA channels 0 and 1 for HS ROM code [ 1.391937] offenburg::flipflop: Registered [ 1.392333] omap_vout: Driver registration starting [ 1.411132] bio: create slab <bio-0> at 0 [ 1.413055] SCSI subsystem initialized [ 1.415679] usbcore: registered new interface driver usbfs [ 1.415924] usbcore: registered new interface driver hub [ 1.416168] usbcore: registered new device driver usb [ 1.416595] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz [ 1.441986] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 1.442016] twl4030: power (irq 373) chaining IRQs 376..383 [ 1.442382] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 1.444244] vgpio vgpio.1: pin #600 is tagged as not connected! [ 1.444396] vgpio vgpio.1: pin #602 is tagged as not connected! [ 1.444641] vgpio vgpio.1: registered 5 GPIOs (@600) [ 1.445709] regulator: VUSB1V5: 1500 mV normal standby [ 1.446166] regulator: VUSB1V8: 1800 mV normal standby [ 1.446594] regulator: VUSB3V1: 3100 mV normal standby [ 1.448333] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 1.449188] regulator: VMMC1: 3000 mV normal standby [ 1.449645] regulator: VDAC: 1800 mV normal standby [ 1.450561] regulator: VAUX2: 1800 mV normal standby [ 1.451019] regulator: VDVI: 1800 mV normal standby [ 1.451934] regulator: VAUX1: 3000 mV normal standby [ 1.452911] regulator: VAUX3: 1800 mV normal standby [ 1.453094] i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz [ 1.453582] i2c_omap i2c_omap.3: bus 3 rev4.0 at 50 kHz [ 1.454193] LinuxPPS API ver. 1 registered [ 1.454193] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.455871] Bluetooth: Core ver 2.15 [ 1.456115] NET: Registered protocol family 31 [ 1.456146] Bluetooth: HCI device and connection manager initialized [ 1.456146] Bluetooth: HCI socket layer initialized [ 1.961791] Switching to clocksource 32k_counter [ 1.964508] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0 [ 1.964569] musb_init_controller: doing clk_get [ 1.964721] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92 [ 1.965118] NET: Registered protocol family 2 [ 1.965240] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.965454] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.965881] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 1.966186] TCP: Hash tables configured (established 16384 bind 16384) [ 1.966217] TCP reno registered [ 1.966308] NET: Registered protocol family 1 [ 1.973419] dspbridge_init: 600000 bytes @ 80a00000 [ 1.975097] Strasbourg: power supply driver loaded [ 1.975311] omap-iommu omap-iommu.0: isp registered [ 1.976104] iovmm-omap initialized isp, major: 252, base-minor: 0 [ 1.976715] fdtexport driver, (c) 2009 TomTom BV [ 1.977416] ttcrypto: found version 1 tt_crypto context [ 1.991088] ashmem: initialized [ 1.991424] msgmni has been set to 985 [ 1.992340] alg: No test for stdrng (krng) [ 1.992401] io scheduler noop registered (default) [ 2.047912] OMAP DSS rev 2.0 [ 2.047973] OMAP DISPC rev 3.0 [ 2.048034] OMAP VENC rev 2 [ 2.048370] OMAP DSI rev 1.0 [ 2.066467] Loop count exceeded in check SR I2C write [ 2.067687] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 2.068206] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 2.068572] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 2.757598] console [ttyO2] enabled [ 2.761505] Hiding boot partition 0... [ 2.767150] mmc0: new high speed MMC card at address 0001 [ 2.773956] mmcblk0: mmc0:0001 M2G1HF 1.86 GiB [ 2.780364] mmcblk0: p2 [ 2.786499] loop: module loaded [ 2.792358] PPP generic driver version 2.4.2 [ 2.797332] PPP Deflate Compression module registered [ 2.802795] PPP BSD Compression module registered [ 2.807769] tun: Universal TUN/TAP device driver, 1.6 [ 2.813079] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.819915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.828460] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.834564] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.842529] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 2.860382] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.867065] usb usb1: configuration #1 chosen from 1 choice [ 2.873382] hub 1-0:1.0: USB hub found [ 2.877441] hub 1-0:1.0: 3 ports detected [ 2.985351] ehci-omap ehci-omap.0: Resetting the 5V75 VBUS line... [ 3.040557] usbcore: registered new interface driver cdc_acm [ 3.046508] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.055511] Initializing USB Mass Storage driver... [ 3.061065] usbcore: registered new interface driver usb-storage [ 3.067443] USB Mass Storage support registered. [ 3.072570] usbcore: registered new interface driver libusual [ 3.079071] usbcore: registered new interface driver usbserial [ 3.085235] usbserial: USB Serial Driver core [ 3.090057] USB Serial support registered for GSM modem (1-port) [ 3.096679] usbcore: registered new interface driver option [ 3.102539] option: v0.7.2:USB Driver for GSM modems [ 3.107971] USB Serial support registered for Sierra USB modem [ 3.114318] usbcore: registered new interface driver sierra [ 3.120239] sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems [ 3.127227] usbcore: registered new interface driver usb_ehset_test [ 3.134185] android_register_function acm [ 3.140350] using rtc device, twl_rtc, for alarms [ 3.145294] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.152130] twl_rtc twl_rtc: Power up reset detected. [ 3.158111] twl_rtc twl_rtc: Enabling TWL-RTC. [ 3.163452] i2c /dev entries driver [ 3.170501] Linux video capture interface: v2.00 [ 3.177001] omap-previewer omap-previewer: omap-previewer: Registered preview wrapper [ 3.186859] omap3isp omap3isp: Revision 15.0 found [ 3.192047] omap-iommu omap-iommu.0: isp: version 1.1 [ 3.201599] OMAP hwmon driver [ 3.207458] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.214660] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.223632] Bluetooth: HCI UART driver ver 2.2 [ 3.228332] Bluetooth: HCI H4 protocol initialized [ 3.233367] Bluetooth: HCI BCSP protocol initialized [ 3.238586] Bluetooth: HCILL protocol initialized [ 3.243560] cpuidle: using governor ladder [ 3.247863] cpuidle: using governor menu [ 3.253631] usbcore: registered new interface driver usbhid [ 3.259582] usbhid: v2.6:USB HID core driver [ 3.264831] logger: created 64K log 'log_main' [ 3.269897] logger: created 256K log 'log_events' [ 3.275146] logger: created 64K log 'log_radio' [ 3.280151] logger: created 64K log 'log_system' [ 3.285614] CSR_BC: csr-bc: Probing CSR BlueCore mode driver. [ 3.292388] tomtom-gps Driver: Probed. [ 3.296325] gps: device registration: name="offenburg" [ 3.302124] tomtom-gps Driver: Registering rfkill for GPS. [ 3.308135] tomtom-gps Driver: Initialized. [ 3.312744] flipflop driver, (c) 2009 TomTom BV [ 3.317810] TomTom CAN-Microprocessor Driver, (C) 2008 TomTom BV [ 3.325408] new PPS source tomtom-pps at ID 0 [ 3.330108] tomtom-pps tomtom-pps: successfully registered pps source at 0. [ 3.337646] tomtom-pps: successfully registered driver. [ 3.343139] suicide_alarm driver, (c) 2011 TomTom BV [ 3.348937] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 3.356353] ALSA device list: [ 3.359466] No soundcards found. [ 3.363128] Netfilter messages via NETLINK v0.30. [ 3.368194] nf_conntrack version 0.5.0 (7882 buckets, 31528 max) [ 3.374755] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 3.382568] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 3.390899] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 3.397521] ctnetlink v0.93: registering with nfnetlink. [ 3.403320] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.409057] TCP cubic registered [ 3.412475] NET: Registered protocol family 17 [ 3.417205] Bluetooth: L2CAP ver 2.14 [ 3.421051] Bluetooth: L2CAP socket layer initialized [ 3.426391] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.431152] Bluetooth: SCO socket layer initialized [ 3.436492] Bluetooth: RFCOMM TTY layer initialized [ 3.441680] Bluetooth: RFCOMM socket layer initialized [ 3.447113] Bluetooth: RFCOMM ver 1.11 [ 3.451049] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.456665] Bluetooth: BNEP filters: protocol multicast [ 3.462188] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.469024] Power Management for TI OMAP3. [ 3.475189] Unable to Changelevel for resource vdd1_opp to 0 [ 3.481201] Error: could not refresh resources [ 3.486450] SR: Nvalues not fused for 1.2G, disabled [ 3.491668] SR: Nvalues not fused for 1G, disabled [ 3.496795] SR2:Fused Nvalues for VDD1OPP3 11193534 [ 3.501953] SR2:Fused Nvalues for VDD1OPP2 10126585 [ 3.507080] SR2:Fused Nvalues for VDD1OPP1 10082000 [ 3.512207] sr1_opp_margin[1]=37500 [ 3.515869] sr1_opp_margin[2]=37500 [ 3.519561] sr1_opp_margin[3]=37500 [ 3.523223] steps added, volt will be recaliberated automatically [ 3.529663] SR2:Fused Nvalues for VDD2OPP1 99f2eb [ 3.534637] SR2:Fused Nvalues for VDD2OPP2 10066063 [ 3.539794] SmartReflex driver initialized [ 4.865386] clock: dpll2_ck failed transition to 'bypassed' [ 4.919281] at24 3-0050: 8192 byte at24 EEPROM (writable) [ 4.928222] input: TSC2007 Touchscreen as /devices/virtual/input/input0 [ 4.935974] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 4.945037] DMA transaction error with device 0 [ 4.950378] OMAP DISPCONTROL read (stallmode)0 [ 4.955108] OMAP DISPCONTROL read (gpout)1 [ 4.959381] OMAP DISPCONTROL read (stallmode)1 [ 4.964721] DPI set dsi clk [ 5.110778] DPI set dsi clk [ 5.123504] regulator_init_complete: incomplete constraints, leaving VAUX3 on [ 5.131378] regulator_init_complete: incomplete constraints, leaving VAUX1 on [ 5.139038] regulator_init_complete: incomplete constraints, leaving VAUX2 on [ 5.148986] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 5.157836] omap3 omap3isp CSI memvs initted [ 5.163146] Registered led device: lcd-backlight [ 5.168304] Freeing init memory: 492K [APTS InitRamFS] TOMTOM initramfs compiled on May 29 2013 11:04:56 initramfs: BOOTMODE: cold AUTOTEST: root=/dev/mmcblk0p2 initramfs: Checking filesystem on: /dev/mmcblk0p2 Opening the watchdog... Kicking the watchdog... (3) /dev/mmcblk0p2: recovering journal /dev/mmcblk0p2: Superblock last mount time is in the future. FIXED. /dev/mmcblk0p2: clean, 2246/122400 files, 104805/488416 bl[ 7.011779] omap_wdt: Unexpected close, not stopping! ocks initramfs: fsck returned: 0 initramfs: Attempti[ 7.021881] kjournald starting. Commit interval 5 seconds ng to mount /dev/mmcblk0p2 on /internalstorage... initramfs: [ 7.033050] EXT3 FS on mmcblk0p2, Trying to mount internal journal /dev/mmcblk0p2 a[ 7.040832] EXT3-fs: mounted filesystem with ordered data mode. s ext3 (options=barrier=1) initramfs: Checking for system update from directory[ 7.054595] signedloop: using 76866 data pages, 377 L0 pages and 2 L1 pages data/ttcontent/common/installed. initramfs: Failed to stat zImage due to No such file or directory. initramfs: Checking for system update from directory data/ttcontent. initramfs: Failed to stat zImage due to No such file or directory. initramfs: Setting up loop device /dev/loop0 using rootfs.img initramfs: Creating root filesystem... initramfs: Trying to mount /dev/loop0 as squashfs (options=none) [ 7.116546] signedloop: activated hash checking on device loop0 initramfs: Trying to mount /dev/loop0 as ext3 (options=barrier=1) [ 7.130493] EXT3-fs: mounted filesystem with ordered data mode. [ 7.136749] kjournald starting. Commit interval 5 seconds AUTOTEST: NAVCORE starting [ 7.151153] omap_wdt: Unexpected close, not stopping! initramfs: Checking CAN firmware [ 7.169647] Process /system/bin/can_firmware_tool requested an executable stack, ignoring... can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/mfd_can_app1.img can_swl: File /system/ttdaemon/can_micro_fir[ 7.229034] omap_wdt: Unexpected close, not stopping! mware/mfd_can_app1.img not available, try the backward compatible file /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img. can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img can_swl: DoCanMicroVersionCheck: bootloader:1177652->0 application:1177652->1177652 can_swl: There is no desired CAN micro bootloader SW version. The CAN micro bootloader SW upgrade mechanism is blocked. can_swl: Actual CAN micro application SW version is as desired: 1177652 initramfs: can firmware matches initramfs: Checking EOL settings initramfs: EOL s[ 7.439331] omap_wdt: Unexpected close, not stopping! ettings: CONFIGURED [/APTS InitRamFS] AUTOTEST: starting init [ 7.772521] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 8.050537] Process /system/bin/fortytwo requested an executable stack, ignoring... [ 8.578277] No device for DAI BC6 [ 8.668670] proc_load: Processor Loaded /system/lib/dsp/baseimage.dof [ 8.676116] omap mailbox rev 4.0 [ 8.682373] proc_start: dsp in running state [ 8.687194] procwrap_detach: deprecated dspbridge ioctl [ 8.698944] No device for DAI omap-mcbsp-dai-0 [ 8.704040] No device for DAI omap-mcbsp-dai-1 [ 8.708862] No device for DAI omap-mcbsp-dai-2 [ 8.714385] No device for DAI omap-mcbsp-dai-3 [ 8.719085] No device for DAI omap-mcbsp-dai-4 [ 8.801971] No device for DAI twl4030 [ 8.806121] No device for DAI twl4030 Voice [ 8.810607] No device for DAI twl4030 Clock [ 8.921630] No device for DAI UDA1334 [ 9.001617] Strasbourg SoC init [ 9.008483] TWL4030 Audio Codec init [ 9.014129] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok [ 9.020324] asoc: BC6 <-> omap-mcbsp-dai-2 mapping ok [ 9.132324] UDA1334 Audio Codec 0.1 [ 9.136566] asoc: UDA1334 <-> omap-mcbsp-dai-1 mapping ok [ 9.455963] usbcore: registered new interface driver snd-usb-audio [ 9.646820] Video decoder chip id 5151 detected! [ 9.666351] Registered tvp5150 video decoder [ 9.746856] omap_vout: registered and initialized video device 3 [v4l2] [ 9.920623] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.927612] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 9.934906] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 9.942993] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400 [ 10.055938] usb usb2: configuration #1 chosen from 1 choice [ 10.062408] hub 2-0:1.0: USB hub found [ 10.071594] hub 2-0:1.0: 3 ports detected [ 10.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.263977] omapflash: Found 1 x16 devices at 0x0 in 16-bit bank [ 10.270996] Intel/Sharp Extended Query Table at 0x0039 [ 10.276641] Intel/Sharp Extended Query Table at 0x0039 [ 10.282104] Intel/Sharp Extended Query Table at 0x0039 [ 10.287658] Intel/Sharp Extended Query Table at 0x0039 [ 10.293212] Intel/Sharp Extended Query Table at 0x0039 [ 10.298767] Intel/Sharp Extended Query Table at 0x0039 [ 10.304321] Using auto-unlock on power-up/resume [ 10.309295] cfi_cmdset_0001: Erase suspend on write enabled [ 10.315917] cmdlinepart partition parsing not available [ 10.321502] Creating 1 MTD partitions on "omapflash": [ 10.326782] 0x000000000000-0x000000400000 : "nor_part0" [ 10.344787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.594757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.844757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 11.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 11.240936] input: MSM-keypad as /devices/virtual/input/input1 [ 11.249267] input: CSW-keypad as /devices/virtual/input/input2 [ 11.817779] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c [ 12.720703] warning: `zygote' uses 32-bit capabilities (legacy support in use) [/APTS Android started][ 20.658660] request_suspend_state: wakeup (3->0) at 19314056442 (2000-01-01 00:00:17.009674064 UTC) [ 27.700958] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c [ 28.014892] OMAP DISPCONTROL read (stallmode)0 [ 28.026184] OMAP DISPCONTROL read (gpout)1 [ 28.052947] OMAP DISPCONTROL read (stallmode)1 [ 28.066070] DPI set dsi clk [ 28.243804] DPI set dsi clk

Nella foto della CPU, puoi vedere sette resistori e i numeri "1001101". Forse è la scelta del dispositivo di avvio. A giudicare dal foglio dati, è possibile modificare SYS.BOOT[5] in 1 e avviare da USB o UART. Quindi puoi caricare il tuo bootloader, cambiare il kernel, patch software.
Maggiori informazioni

Tratto da qui
29-07-2022, 14:41
Mnkach

Questo dispositivo ha una CPU OMAP3630.
Inoltre, ha una UART.
Registro di avvio:

Codice:

Texas Instruments X-Loader 1.41 (Mar 30 2012 - 11:31:59) Starting OS Bootloader from NOR ... U-Boot 1.3.41077437-dirty (Oct 3 2012 - 17:18:30) OMAP3630-HS rev 2, CPU-OPP2 L3-200MHz OMAP3630 Strasbourg 1.3 Version + mDDR (Boot MMC) DRAM: 512 MB Using default environment In: serial Out: serial Err: serial [APTS Logo/] ## Executing script at 80a25a20 get_format -------- 1 -------- ## Executing script at 80a25ddc get_format -------- 1 -------- Using device mmc0, partition 2 Loading from block device mmc device 0, partition 2: Name: xxa2 Type: U-Boot File:/uboot.conf ** File not found /uboot.conf 'uboot.conf' ignored Hit any key to stop autoboot: 0 ## Executing script at 80a257d8 get_format -------- 1 -------- Not executing bootloader applet Loaded device-tree at address 83300000 of length 2616 bytes Using device mmc0, partition 2 Loading from block device mmc device 0, partition 2: Name: xxa2 Type: U-Boot File:/zImage 2584680 bytes read Boot with gzipped Image Verifying device tree... libfdt fdt_setprop() failed Verifying executable image signature ... Starting kernel ... Resetting boot powerdown watchdog [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.9 (svc_quickbuild@nlsrvup-qbs08) (gcc version 4.3.3 (TomTom CipherWizardry 2009q1_203-474426) ) #2 PREEMPT Wed May 29 11:06:08 CEST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Strasbourg A2 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] factory data: bootmem reserved successful [ 0.000000] DIE ID: 118C0002FE380000015EEBD90501901A [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] omap_sam_base (VA) == 0xfe40f000 [ 0.000000] omap_sram_start (PA) == 0x4020f000 [ 0.000000] omap_sram_size (SIZE) == 0x1000 [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Reserving 3145728 bytes SDRAM for VRAM [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 console=ttyO2,115200 androidboot.console=ttyO2 sysboot_mode=cold init=/init videoout=omap24xxvout vram=0x300000,0x83000000 lpj=2334720 brick=0 [ 0.000000] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 504064KB available (4304K code, 1106K data, 492K init, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0083000 ( 492 kB) [ 0.000000] .text : 0xc0083000 - 0xc04b7000 (4304 kB) [ 0.000000] .data : 0xc04d2000 - 0xc0518d60 ( 284 kB) [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:402 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] Reprogramming SDRC clock to 400000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop (skipped) preset value.. 597.64 BogoMIPS (lpj=2334720) [ 0.000000] Security Framework initialized [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Initializing cgroup subsys freezer [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] regulator: core version 0.5 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] vgpio vgpio.0: pin #403 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #412 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #413 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #415 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #423 is tagged as not connected! [ 0.000000] vgpio vgpio.0: pin #458 is tagged as not connected! [ 0.000000] vgpio vgpio.0: registered 59 GPIOs (@400) [ 0.000000] Strasbourg_tvp515x: Driver registration Starting [ 0.000000] Strasbourg_tvp515x: Driver registration complete [ 1.390869] OMAP DMA hardware revision 5.0 [ 1.390930] Reserving DMA channels 0 and 1 for HS ROM code [ 1.391937] offenburg::flipflop: Registered [ 1.392333] omap_vout: Driver registration starting [ 1.411132] bio: create slab <bio-0> at 0 [ 1.413055] SCSI subsystem initialized [ 1.415679] usbcore: registered new interface driver usbfs [ 1.415924] usbcore: registered new interface driver hub [ 1.416168] usbcore: registered new device driver usb [ 1.416595] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz [ 1.441986] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 1.442016] twl4030: power (irq 373) chaining IRQs 376..383 [ 1.442382] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 1.444244] vgpio vgpio.1: pin #600 is tagged as not connected! [ 1.444396] vgpio vgpio.1: pin #602 is tagged as not connected! [ 1.444641] vgpio vgpio.1: registered 5 GPIOs (@600) [ 1.445709] regulator: VUSB1V5: 1500 mV normal standby [ 1.446166] regulator: VUSB1V8: 1800 mV normal standby [ 1.446594] regulator: VUSB3V1: 3100 mV normal standby [ 1.448333] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 1.449188] regulator: VMMC1: 3000 mV normal standby [ 1.449645] regulator: VDAC: 1800 mV normal standby [ 1.450561] regulator: VAUX2: 1800 mV normal standby [ 1.451019] regulator: VDVI: 1800 mV normal standby [ 1.451934] regulator: VAUX1: 3000 mV normal standby [ 1.452911] regulator: VAUX3: 1800 mV normal standby [ 1.453094] i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz [ 1.453582] i2c_omap i2c_omap.3: bus 3 rev4.0 at 50 kHz [ 1.454193] LinuxPPS API ver. 1 registered [ 1.454193] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.455871] Bluetooth: Core ver 2.15 [ 1.456115] NET: Registered protocol family 31 [ 1.456146] Bluetooth: HCI device and connection manager initialized [ 1.456146] Bluetooth: HCI socket layer initialized [ 1.961791] Switching to clocksource 32k_counter [ 1.964508] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0 [ 1.964569] musb_init_controller: doing clk_get [ 1.964721] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92 [ 1.965118] NET: Registered protocol family 2 [ 1.965240] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.965454] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.965881] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 1.966186] TCP: Hash tables configured (established 16384 bind 16384) [ 1.966217] TCP reno registered [ 1.966308] NET: Registered protocol family 1 [ 1.973419] dspbridge_init: 600000 bytes @ 80a00000 [ 1.975097] Strasbourg: power supply driver loaded [ 1.975311] omap-iommu omap-iommu.0: isp registered [ 1.976104] iovmm-omap initialized isp, major: 252, base-minor: 0 [ 1.976715] fdtexport driver, (c) 2009 TomTom BV [ 1.977416] ttcrypto: found version 1 tt_crypto context [ 1.991088] ashmem: initialized [ 1.991424] msgmni has been set to 985 [ 1.992340] alg: No test for stdrng (krng) [ 1.992401] io scheduler noop registered (default) [ 2.047912] OMAP DSS rev 2.0 [ 2.047973] OMAP DISPC rev 3.0 [ 2.048034] OMAP VENC rev 2 [ 2.048370] OMAP DSI rev 1.0 [ 2.066467] Loop count exceeded in check SR I2C write [ 2.067687] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 2.068206] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 2.068572] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 2.757598] console [ttyO2] enabled [ 2.761505] Hiding boot partition 0... [ 2.767150] mmc0: new high speed MMC card at address 0001 [ 2.773956] mmcblk0: mmc0:0001 M2G1HF 1.86 GiB [ 2.780364] mmcblk0: p2 [ 2.786499] loop: module loaded [ 2.792358] PPP generic driver version 2.4.2 [ 2.797332] PPP Deflate Compression module registered [ 2.802795] PPP BSD Compression module registered [ 2.807769] tun: Universal TUN/TAP device driver, 1.6 [ 2.813079] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.819915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.828460] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.834564] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.842529] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 2.860382] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.867065] usb usb1: configuration #1 chosen from 1 choice [ 2.873382] hub 1-0:1.0: USB hub found [ 2.877441] hub 1-0:1.0: 3 ports detected [ 2.985351] ehci-omap ehci-omap.0: Resetting the 5V75 VBUS line... [ 3.040557] usbcore: registered new interface driver cdc_acm [ 3.046508] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.055511] Initializing USB Mass Storage driver... [ 3.061065] usbcore: registered new interface driver usb-storage [ 3.067443] USB Mass Storage support registered. [ 3.072570] usbcore: registered new interface driver libusual [ 3.079071] usbcore: registered new interface driver usbserial [ 3.085235] usbserial: USB Serial Driver core [ 3.090057] USB Serial support registered for GSM modem (1-port) [ 3.096679] usbcore: registered new interface driver option [ 3.102539] option: v0.7.2:USB Driver for GSM modems [ 3.107971] USB Serial support registered for Sierra USB modem [ 3.114318] usbcore: registered new interface driver sierra [ 3.120239] sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems [ 3.127227] usbcore: registered new interface driver usb_ehset_test [ 3.134185] android_register_function acm [ 3.140350] using rtc device, twl_rtc, for alarms [ 3.145294] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.152130] twl_rtc twl_rtc: Power up reset detected. [ 3.158111] twl_rtc twl_rtc: Enabling TWL-RTC. [ 3.163452] i2c /dev entries driver [ 3.170501] Linux video capture interface: v2.00 [ 3.177001] omap-previewer omap-previewer: omap-previewer: Registered preview wrapper [ 3.186859] omap3isp omap3isp: Revision 15.0 found [ 3.192047] omap-iommu omap-iommu.0: isp: version 1.1 [ 3.201599] OMAP hwmon driver [ 3.207458] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.214660] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.223632] Bluetooth: HCI UART driver ver 2.2 [ 3.228332] Bluetooth: HCI H4 protocol initialized [ 3.233367] Bluetooth: HCI BCSP protocol initialized [ 3.238586] Bluetooth: HCILL protocol initialized [ 3.243560] cpuidle: using governor ladder [ 3.247863] cpuidle: using governor menu [ 3.253631] usbcore: registered new interface driver usbhid [ 3.259582] usbhid: v2.6:USB HID core driver [ 3.264831] logger: created 64K log 'log_main' [ 3.269897] logger: created 256K log 'log_events' [ 3.275146] logger: created 64K log 'log_radio' [ 3.280151] logger: created 64K log 'log_system' [ 3.285614] CSR_BC: csr-bc: Probing CSR BlueCore mode driver. [ 3.292388] tomtom-gps Driver: Probed. [ 3.296325] gps: device registration: name="offenburg" [ 3.302124] tomtom-gps Driver: Registering rfkill for GPS. [ 3.308135] tomtom-gps Driver: Initialized. [ 3.312744] flipflop driver, (c) 2009 TomTom BV [ 3.317810] TomTom CAN-Microprocessor Driver, (C) 2008 TomTom BV [ 3.325408] new PPS source tomtom-pps at ID 0 [ 3.330108] tomtom-pps tomtom-pps: successfully registered pps source at 0. [ 3.337646] tomtom-pps: successfully registered driver. [ 3.343139] suicide_alarm driver, (c) 2011 TomTom BV [ 3.348937] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 3.356353] ALSA device list: [ 3.359466] No soundcards found. [ 3.363128] Netfilter messages via NETLINK v0.30. [ 3.368194] nf_conntrack version 0.5.0 (7882 buckets, 31528 max) [ 3.374755] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 3.382568] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 3.390899] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 3.397521] ctnetlink v0.93: registering with nfnetlink. [ 3.403320] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.409057] TCP cubic registered [ 3.412475] NET: Registered protocol family 17 [ 3.417205] Bluetooth: L2CAP ver 2.14 [ 3.421051] Bluetooth: L2CAP socket layer initialized [ 3.426391] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.431152] Bluetooth: SCO socket layer initialized [ 3.436492] Bluetooth: RFCOMM TTY layer initialized [ 3.441680] Bluetooth: RFCOMM socket layer initialized [ 3.447113] Bluetooth: RFCOMM ver 1.11 [ 3.451049] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.456665] Bluetooth: BNEP filters: protocol multicast [ 3.462188] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.469024] Power Management for TI OMAP3. [ 3.475189] Unable to Changelevel for resource vdd1_opp to 0 [ 3.481201] Error: could not refresh resources [ 3.486450] SR: Nvalues not fused for 1.2G, disabled [ 3.491668] SR: Nvalues not fused for 1G, disabled [ 3.496795] SR2:Fused Nvalues for VDD1OPP3 11193534 [ 3.501953] SR2:Fused Nvalues for VDD1OPP2 10126585 [ 3.507080] SR2:Fused Nvalues for VDD1OPP1 10082000 [ 3.512207] sr1_opp_margin[1]=37500 [ 3.515869] sr1_opp_margin[2]=37500 [ 3.519561] sr1_opp_margin[3]=37500 [ 3.523223] steps added, volt will be recaliberated automatically [ 3.529663] SR2:Fused Nvalues for VDD2OPP1 99f2eb [ 3.534637] SR2:Fused Nvalues for VDD2OPP2 10066063 [ 3.539794] SmartReflex driver initialized [ 4.865386] clock: dpll2_ck failed transition to 'bypassed' [ 4.919281] at24 3-0050: 8192 byte at24 EEPROM (writable) [ 4.928222] input: TSC2007 Touchscreen as /devices/virtual/input/input0 [ 4.935974] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 4.945037] DMA transaction error with device 0 [ 4.950378] OMAP DISPCONTROL read (stallmode)0 [ 4.955108] OMAP DISPCONTROL read (gpout)1 [ 4.959381] OMAP DISPCONTROL read (stallmode)1 [ 4.964721] DPI set dsi clk [ 5.110778] DPI set dsi clk [ 5.123504] regulator_init_complete: incomplete constraints, leaving VAUX3 on [ 5.131378] regulator_init_complete: incomplete constraints, leaving VAUX1 on [ 5.139038] regulator_init_complete: incomplete constraints, leaving VAUX2 on [ 5.148986] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 5.157836] omap3 omap3isp CSI memvs initted [ 5.163146] Registered led device: lcd-backlight [ 5.168304] Freeing init memory: 492K [APTS InitRamFS] TOMTOM initramfs compiled on May 29 2013 11:04:56 initramfs: BOOTMODE: cold AUTOTEST: root=/dev/mmcblk0p2 initramfs: Checking filesystem on: /dev/mmcblk0p2 Opening the watchdog... Kicking the watchdog... (3) /dev/mmcblk0p2: recovering journal /dev/mmcblk0p2: Superblock last mount time is in the future. FIXED. /dev/mmcblk0p2: clean, 2246/122400 files, 104805/488416 bl[ 7.011779] omap_wdt: Unexpected close, not stopping! ocks initramfs: fsck returned: 0 initramfs: Attempti[ 7.021881] kjournald starting. Commit interval 5 seconds ng to mount /dev/mmcblk0p2 on /internalstorage... initramfs: [ 7.033050] EXT3 FS on mmcblk0p2, Trying to mount internal journal /dev/mmcblk0p2 a[ 7.040832] EXT3-fs: mounted filesystem with ordered data mode. s ext3 (options=barrier=1) initramfs: Checking for system update from directory[ 7.054595] signedloop: using 76866 data pages, 377 L0 pages and 2 L1 pages data/ttcontent/common/installed. initramfs: Failed to stat zImage due to No such file or directory. initramfs: Checking for system update from directory data/ttcontent. initramfs: Failed to stat zImage due to No such file or directory. initramfs: Setting up loop device /dev/loop0 using rootfs.img initramfs: Creating root filesystem... initramfs: Trying to mount /dev/loop0 as squashfs (options=none) [ 7.116546] signedloop: activated hash checking on device loop0 initramfs: Trying to mount /dev/loop0 as ext3 (options=barrier=1) [ 7.130493] EXT3-fs: mounted filesystem with ordered data mode. [ 7.136749] kjournald starting. Commit interval 5 seconds AUTOTEST: NAVCORE starting [ 7.151153] omap_wdt: Unexpected close, not stopping! initramfs: Checking CAN firmware [ 7.169647] Process /system/bin/can_firmware_tool requested an executable stack, ignoring... can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/mfd_can_app1.img can_swl: File /system/ttdaemon/can_micro_fir[ 7.229034] omap_wdt: Unexpected close, not stopping! mware/mfd_can_app1.img not available, try the backward compatible file /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img. can_swl: GetDesiredSwVersion(): No file named /system/ttdaemon/can_micro_firmware/strasbourg_can_app1.img can_swl: DoCanMicroVersionCheck: bootloader:1177652->0 application:1177652->1177652 can_swl: There is no desired CAN micro bootloader SW version. The CAN micro bootloader SW upgrade mechanism is blocked. can_swl: Actual CAN micro application SW version is as desired: 1177652 initramfs: can firmware matches initramfs: Checking EOL settings initramfs: EOL s[ 7.439331] omap_wdt: Unexpected close, not stopping! ettings: CONFIGURED [/APTS InitRamFS] AUTOTEST: starting init [ 7.772521] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 8.050537] Process /system/bin/fortytwo requested an executable stack, ignoring... [ 8.578277] No device for DAI BC6 [ 8.668670] proc_load: Processor Loaded /system/lib/dsp/baseimage.dof [ 8.676116] omap mailbox rev 4.0 [ 8.682373] proc_start: dsp in running state [ 8.687194] procwrap_detach: deprecated dspbridge ioctl [ 8.698944] No device for DAI omap-mcbsp-dai-0 [ 8.704040] No device for DAI omap-mcbsp-dai-1 [ 8.708862] No device for DAI omap-mcbsp-dai-2 [ 8.714385] No device for DAI omap-mcbsp-dai-3 [ 8.719085] No device for DAI omap-mcbsp-dai-4 [ 8.801971] No device for DAI twl4030 [ 8.806121] No device for DAI twl4030 Voice [ 8.810607] No device for DAI twl4030 Clock [ 8.921630] No device for DAI UDA1334 [ 9.001617] Strasbourg SoC init [ 9.008483] TWL4030 Audio Codec init [ 9.014129] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok [ 9.020324] asoc: BC6 <-> omap-mcbsp-dai-2 mapping ok [ 9.132324] UDA1334 Audio Codec 0.1 [ 9.136566] asoc: UDA1334 <-> omap-mcbsp-dai-1 mapping ok [ 9.455963] usbcore: registered new interface driver snd-usb-audio [ 9.646820] Video decoder chip id 5151 detected! [ 9.666351] Registered tvp5150 video decoder [ 9.746856] omap_vout: registered and initialized video device 3 [v4l2] [ 9.920623] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.927612] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 9.934906] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 9.942993] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400 [ 10.055938] usb usb2: configuration #1 chosen from 1 choice [ 10.062408] hub 2-0:1.0: USB hub found [ 10.071594] hub 2-0:1.0: 3 ports detected [ 10.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.263977] omapflash: Found 1 x16 devices at 0x0 in 16-bit bank [ 10.270996] Intel/Sharp Extended Query Table at 0x0039 [ 10.276641] Intel/Sharp Extended Query Table at 0x0039 [ 10.282104] Intel/Sharp Extended Query Table at 0x0039 [ 10.287658] Intel/Sharp Extended Query Table at 0x0039 [ 10.293212] Intel/Sharp Extended Query Table at 0x0039 [ 10.298767] Intel/Sharp Extended Query Table at 0x0039 [ 10.304321] Using auto-unlock on power-up/resume [ 10.309295] cfi_cmdset_0001: Erase suspend on write enabled [ 10.315917] cmdlinepart partition parsing not available [ 10.321502] Creating 1 MTD partitions on "omapflash": [ 10.326782] 0x000000000000-0x000000400000 : "nor_part0" [ 10.344787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.594757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 10.844757] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 11.094787] ohci-omap3 ohci-omap3.0: trigging poll (state: 1)... [ 11.240936] input: MSM-keypad as /devices/virtual/input/input1 [ 11.249267] input: CSW-keypad as /devices/virtual/input/input2 [ 11.817779] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c [ 12.720703] warning: `zygote' uses 32-bit capabilities (legacy support in use) [/APTS Android started][ 20.658660] request_suspend_state: wakeup (3->0) at 19314056442 (2000-01-01 00:00:17.009674064 UTC) [ 27.700958] Callback set_scenario not implemented in /opt/buildagent/workspace/root/platform/Froyo/Nightly/p-a-strasbourgmfd10-kz/ngl-strbdev-main/Strasbourg-build-noprepare/platform/mydroid/kernel/android-2.6.32/drivers/tomtom/sound/uda1334.c [ 28.014892] OMAP DISPCONTROL read (stallmode)0 [ 28.026184] OMAP DISPCONTROL read (gpout)1 [ 28.052947] OMAP DISPCONTROL read (stallmode)1 [ 28.066070] DPI set dsi clk [ 28.243804] DPI set dsi clk

Ci sono 7 transistor vicino alla CPU (vicino a "1001101"). Sembra che sia la selezione del dispositivo di avvio. In base al foglio dati, è possibile modificare SYS.BOOT[5] in 1 e avviare da UART o USB.
O forse è possibile modificare il dispositivo di avvio dopo "Hit any key to stop autoboot:".
Quindi è possibile caricare un bootloader personalizzato, cambiare il kernel e patchare navcore.

Altre foto qui
Fonte