Hadu CCCam DVB plugin beta 0.100
Hadu is plugin for DVB softwares on PC using DVB TV-Cards (Windows).
Finalmente un plugins che sembra andare meglio dei flycccam ed è gratis....
In Upload :pioneer 1420:
Un ringraziamento a receptor x la info
Visualizzazione Stampabile
Hadu CCCam DVB plugin beta 0.100
Hadu is plugin for DVB softwares on PC using DVB TV-Cards (Windows).
Finalmente un plugins che sembra andare meglio dei flycccam ed è gratis....
In Upload :pioneer 1420:
Un ringraziamento a receptor x la info
in upload la nuova 0.1.0.1
versione 0.1.0.2 in upload
0.1.0.2:
-correction concerning the internal CSA support (DVBViewer plugin). Don't use it unless absolutely necessary, especially for HD channels. Prefer the CSA.dll/FFDeCSA.dll (both of them) instead (see DVBViewer section),
-bug fix for incorrect accepting of some certain kind of nodes.
0.1.0.3:
-DCWs display added into the CAID list. This display corresponds to the last DCW(s) received; which doesn't mean necessarily the current one(s),
-all the windows of the plugin can now be minimized (and restored). The "Monitor" and "Server Infos" windows are also now resizeable (only the horizontal sizing is used; mainly to have a wider area for the lists of data),
-choice to display IP Address or URL in the Server list has been added. The default option is still to display the IP Address (see DisplayIPorURL option),
-the refresh time for the Server infos has been set to 4 seconds,
-bug fix concerning the node disconnection treatment,
-still another bug fix for incorrect accepting of some certain kind of nodes,
-an ECM timeout option has been added (see ECMTimOut option). It's mostly to be used with "wrapper" applications like SSSP Plug, ... As I cannot test these kinds of application, I don't know if this feature is sufficient to make my plugin compliant with them,
-node ID display added into the nodes list (last columns).
IN UPLOAD
Ormai in continuo aggiornmento....
0.1.0.4:
-another modification concerning the "wrapper" applications like SSSP Plug, ... Remember to set "UsePSITables=0" (or uncheck the corresponding menu entry) and "ECMTimeOut=12" (for instance) for these applications.
IN UPLOAD
Hadu Version Beta 0.1.0.5
0.1.0.5:
-bug fix for Cryptworks "long" ECMs (for Digiturk mainly).
IN UPLOAD
Hadu - CCCam DVB plugin - v Beta 0.106
Hadu - CCCam DVB plugin - v Beta 0.107
hai per caso il changelog?
ops... c'era scritto dentro... hehehe
0.1.0.7:
-bug fix for a incorrect CAID selection process, introduced into the 0.1.0.6 version. It mainly concerns all the Seca providers (but could have a negative impact for all the others CAIDs too).
0.1.0.8:
-the way to ignore/use an available node has changed: right-click now on the node to get the corresponding menu (currently limited to this feature only),
-because of the tremendous number or disconnections/re-connections of some nodes for most of the CCCam servers (especially, but not only, those of version 2.0.11), the restart of the CAID selection process is no more always called. Unless no nodes have been found to decode the current channel; in this last case, the restart is still automatic. In some rare cases, you may have to ask manually to retry all the ECMs,
-Irdeto ECMs are now sent to the CCCam server(s) one at time only (though still currently a workaround),
-a new modification into the CAID selection process, to increase the stability of the decoding process.
0.1.0.9 in up
0.1.0.9:
-automatic detection for sssp "wrapper" application (if it's called ssspxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). However, you can always force it, using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-modification to stick as tight as possible to the answer of the server(s) concerning the ECM requests. It may have some negative impacts in some rare situations. In these later cases, atop and restart the concerned server connection,
-new modification for Irdeto ECMs. Only the first positive ChID (i.e. available for decoding purposes) is used, after a first test with all of them.
Changelog:
----------
0.1.1.0:
-several modifications for Irdeto ECMs (once more),
-possibility to 'Log a PID' added (within the main menu),
-bug fix for incorrect statistics in case of Irdeto ECMs,
-"WantEmus" option is now relative to accepting or refusing emulators from server(s): default value is 1=Yes,
-bug fixes for CAID and providers associated to emulators,
-some fixes for improper data send by some "wrapper" applications,
-modification into the ECM time out process,
-time response from server(s) added (2 new columns into the "Server Infos" window). Both for returned DCWs and for negative answers (i.e. 'No decoding' messages), there is a first latency for multiple Irdeto ECMs (if several ChIDs are used),
-some fixes for nodes display in case of more than one server active.
IN UP
Changelog:
----------
0.1.1.1:
-bug fix for providers associated to emulators.
IN UP
Hadu CCcam 0.1.1.2
Changelog:
----------
0.1.1.2:
-bug fix for some CAIDs associated to emulators,
-"NoSID" option added, to ignore one or several SIDs for a server,
-"Enable/Disable (one CAID)" and "Enable/Disable (all CAIDs)" added into the contextual menu for a node (right-click on the node to get the corresponding menu). These menu entries correspond to the "NoNodeCAID" option into Hadu.ini; refer to this option for more details. Note that "Ignore/Use" menu entry is temporary, associated to the current session with the server, and specific to one node. While these two new menu entries are saved (i.e. not temporary), and specific to one server (all the CAIDs for a server = all the nodes belonging to this server) or to one CAID of the server (which may correspond to one or several nodes for the concerned server).
In Upload
Hadu CCcam 0.1.1.3
Changelog:
----------
0.1.1.3:
-minor modification for the connection time out process,
-priority added: general rules (see "PrioGenRules" option) and CAID/provider for nodes (see "PrioCAIDProv" option),
-modification to accept connection for CCCam servers v2.1.2.
IN UP
Hadu CCcam 0.1.1.4
-added the possibility to cancel the temporarily effects of the manual ECM PID selection within the server menu (i.e. without the necessity to change or re-select the channel),
-bug fixes inside the node priority process (introduced into version 0.1.1.3).
In Upload
Hadu CCcam 0.1.1.5
Changelog:
-added the possibility to use an icon for Hadu in the Systray (see "Systray" menu),
-some minor bug fixes,
-automatic detection for Trumanshare "wrapper" application (if it's called trumanxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). As for Sssp, it's always possible to change it using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-fix for a nasty bug concerning the node selection (still introduced into version 0.1.1.3). The start to decode a new channel should be now faster, mostly of the time (but still not faster than your server(s), of course).
In Upload
Changelog:
----------
0.1.1.6:
-added the possibility to modify the maximum number of CAID/node loops (see "MaxCAIDLoops" option),
-bug fix concerning the closing and re-opening of the same ECM PID in some cases,
-bug fix for ECM PID closing requests (not correctly processed in some cases),
-number of timeouts for ECM requests added into the nodes list,
-minor enhancements into ECM request for the same ECM PID.
IN UP
0.1.1.7:
-bug fix concerning the trouble for the first of the DCW in case of DVBViewer and NDS/Videoduard encrypted channels (first decoding for the channel too long in this case).
in up:pioneer 1420:
Version 0.1.1.8:
-left double-click on icon in Systray displays the Monitor window,
-workaround for Trumanshare "wrapper" application, which sends TS data with an incorrect length,
-maximum value for ECMTimeOut option has been increased to 120 seconds,
-PMT PID is displayed within the Monitor window (just before the status of the PMT),
-decrypt cyphered subtitles when used as a DVBViewer plugin (DVBViewerAllAudio=1 is required),
-bug fix concerning Irdeto ECMs with a lots of ChIDs,
-TimeRecon option added, for re-connections. It is recommended not to modify the default value for this option.
In Upload
Version 0.1.1.9:
-minor modifications concerning the windows resizing,
- it's now possible to load up to 64 CCCam servers within Hadu.
But it's still limited to 6 active CCCam servers at the same time;
you can choose which 6 active CCCam servers within -up to-
the 64 possible ones,
- the maximum number of hops per node is now restricted to 8
(which is probably still too much from a reasonable point of view),
- an external -limited- tool called HaduSer has been created in order
to get a few infos from Hadu and to send it a few commands, for
Windows Vista/Seven and the DVBViewer recording service (and the
DVBLink TVSource service). See "DVBViewerRecServ" option within the
[Specific] section of Hadu.ini, and refer to the readme.txt file coming
with Haduser for more infos,
- several bug fixes concerning the Irdeto CAID and the way Hadu selects
the correct ChId for a channel,
- minor bug fix within the statistic computes for a node,
- a few modifications into the ECM process and selection,
- the way Hadu starts/stops CCCam servers within the DVBViewer recording
service has been modified. By default, session(s) with the concerned
server(s) is/are now only active when the recording is running: see
"DVBViewerIdleServ" option within the [Specific] section of Hadu.ini.
But you can still return to the former way (i.e. session with the server
always active) by setting this option to 1,
- workaround for non null messages 05 (Server ask) in case of CCCam server
version 2.1.2. Hadu will now stop and re-start the server session, after a
few ECM answers when having received this message.
In Upload
Changelog:
----------
0.1.2.0:
-bug fix for the "DVBViewerRecServ" option when set to 2 (always active),
-bug fix for incomplete server disconnections (if provoked by the server).
in upload
Hadu - v Beta 0.121
Changelog:
----------
0.1.2.1:
-bug fix for some incorrect connections in some cases.
In Upload
-Version Beta 0.1.2.2 in upload:pioneer 1420:
Changelog:
----------
0.1.2.2:
-Workaround for CCCam version 1.2.3. Hadu is now considered back as a 2.0.11 version client by default. Furthermore, it's possible to modify the client version sent to the server (see "Version" option).
Hadu - CCCam DVB plugin - version Beta 0.123
Changelog:
----------
0.1.2.3:
-EMM support (still experimental),
-possibility to indicate a static Node ID added,
-ECM process largely modified. If this new version doesn't work properly for you, get back to your former version,
-controls concerning the ECM provider completed,
-default value for the "WantEmus" option is now set to [0=No],
-memory occupation for each server lowered,
-several other bug fixes and minor enhancements.
In Upload
Hadu - CCCam DVB plugin - version Beta 0.124
Changelog:
----------
0.1.2.4:
-server build display added (Server Infos window),
-DCWsOneServ general option added (though it's not recommended to change it),
-several bug fixes concerning the connection step. The timeout value for connections is now 3 times the timeout value for ECM receptions,
-changes within the internal events process (clean up and bug fixes),
-NonStd server option added, relative to some CCCam server emulation (i.e. servers with a non standard CCCam server behavior, probably due to a modified software or an emulation). A warning is eventually displayed about possible such kind of servers in the Server Infos window,
-size for Monitor and Server Infos windows saved into Hadu.ini (if changed by the user),
-internal option NoDelay set back to a safer value by default (due to too many crashes or hangs with several DVB applications). You can now remove the "Nodelay=0" configuration line within your Hadu.ini file, if you've set it before,
-reinforcement of the received CCCam data controls,
-modification for the status of the CCCam servers when started (Monitor window),
-simplification concerning the ECM PID selection. If an ECM PID is now forced (using the ECM list into the Monitor window) and if the result is unsuccessful, a full standard retry then occur (i.e. using all the possible nodes and CAIDs, and respecting the priority rules defined). The "Cancel manual ECM PID selection" menu has been removed (no more used),
-support of the main CCCam "checks": commands 05, 0B, ... The former workaround for command 05 checks has been removed. The main check currently occurs after more than 2 hours (i.e. long session),
-a few modifications or adds concerning the informations logged,
-for users using also HaduSer, please upgrade to HaduSer version 1.0.0.2 (or else exchanges with this new version of Hadu is no more possible)
In Upload
0.1.2.5:
-several major bug fixes, mainly if 2 or more servers are used (but not only),
-correct support of the server rejection for the user connection. Possible error messages returned by the server are now displayed at the bottom at the Server Infos window,
-"IgnoreProvFor" option added, to ignore the provider checks for one or several CAID. It may be needed for instance, if the CAID tunneling feature (Betacrypt<--->Nagra3) is no more working properly in your case (set "IgnoreProvFor=1702" for the concerned server).
in upload :pioneer 1420: QUI
Hadu - CCCam DVB plugin - version Beta 0.126
-temporary workaround for OSCAM servers (see "OSCAMWa" option, and all the comments for it) added as a possible option,
-possibility to have only EMM active added (see "EMMAlone" option),
-the maximum number of providers per nodes has been increased to 40,
-possibility to update more than one card (i.e. node) of the same CAID for EMM purposes added,
-bug fix for nodes with too many providers,
-transparency for Monitor and Server Infos windows added (see "UseTransparency" option for more details),
-"IgnoreProvFor" option now also used for EMMs,
-providers are no more checked for Betacrypt CAIDs (ECMs and EMMs). So, you can remove your "IgnoreProvFor=1702" or "IgnoreProvFor=1722" option lines if you wish,
-bug fix for BetaCrypt EMMs process,
-bug fix concerning the DCWsOneServ option,
-bug fix for the emulator nodes recognizing,
-modification for the non standard CCCam servers and the corresponding "NonStd" option: it's now supposed to work automatically (see "NonStd" option for more details),
-bug fixes concerning different particuliar cases when several servers are in use,
-bug fix for incorrect behavior of server connections when the plugin is deactivated,
-bug fix because current ECMs were not sent immediately when a new server is activated (if several servers are active and at least one is OK),
-by default value has been changed for the MaxConnections and MaxECMPIDs options. You'll have to manually modify your current Hadu.ini file, if you plan to use these new by default values,
-number of active CCCam servers at the same time no more limited to 6 (but still limited to a maximum of 64 CCCam servers, active or not active). Set the new by default values for the MaxConnections and MaxECMPIDs options, if several servers are in use,
-bug fixes for a possible improper re-connection when the disconnection has been provoked externally (network and/or distant server),
-bug fix for Viaccess "long" ECMs (for TNTSat mainly),
-size for Monitor and Server Infos windows now also saved into Hadu.ini (if changed by the user) when pushbutton "OK" is pressed. Furthermore, the size of the columns for the different lists of these windows is now also saved,
-it's now possible to sort the nodes list into the Server Infos window for some columns,
-reject of null DCWs (processed as 'No decoding'),
-some other bug fixes and minor enhancements.
In Upload
...ciao a tutti... scusate... sono interessato a provare ad utilizzare hadu... possiedo una ss2 e la uso solitamente con dvbdream... volevo chiedere a voi esperti se esiste una guida, un tutorial, qualcosa che mi permetta di riuscire a fare "andare il tutto"... grazie delle risposte... magari anche in pm... ciao! by theralman....
metti il plug nella cartella dei plugins ,apri il file hadu.ini e li metti le configurazioni(esempio nel file di configurazione di hadu)chiudiamo qui però...niente sharing su gbcnet:pioneer 1420:
Per configurare la hadu
grazie