Visualizzazione Stampabile
-
PBNIGMA-VX-2.0-12_OE2.0_dm800_SIM2_ssl84D_drhg_25-12-2013
:besmellah2:
Code:
######## PBNIGMA-VX-2.0-12_OE2.0_dm800_SIM2_ssl84D_drhg_25-12-2013 #########
****** This is a Clean image packed in Linux environment (not by plugins) *******
Patched enigma2: v4.0.0 by drhg
BootLoader for sim2: SSL-84D
Emu: CCcam 2.3.0
No deleted stuff
Image tested in internal and External Flash & all OK
***** E-Mail: drhg@hotmail.com *****
################################################## #######
Download
cheers
http://bbs.dreamoem.com/images/smilies/biggrin.png
drhg
-
TDW_dm800-OE2.0_SIM2_SSL-84D
TDW_dm800-OE2.0_SIM2_SSL-84D_drhg_2013-12-28
http://imageshack.com/a/img194/5250/wpa4.jpg
######## TDW_dm800-OE2.0_SIM2_SSL-84D_drhg_2013-12-28 #########
****** This is a Clean image packed in Linux environment (not by plugins) ******* original image: TDW_dreambox-image-dm800-20131226164722.nfi Patched enigma2: v4.0.0 by drhg BootLoader for sim2: SSL-84D Settings: Pre-adjusted Spinners: replaced by default No deleted stuff Image tested in internal and External Flash & all OK Note: this image is based on polar team panel ***** E-Mail: drhg@hotmail.com ***** ################################################## #######
Download
Cheers
http://www.dreamoem.com/images/smilies/wink.png
drhg
-
LT.Ninth.3-dm800_OE2.0_SIM2_SSL-84D_drhg_2013-12-28
بسم الله الرحمن الرحيم
http://imageshack.com/a/img32/732/3b0g.jpg
Code:
######## LT.Ninth.3-dm800_OE2.0_SIM2_SSL-84D_drhg_2013-12-28 #########
****** This is a Clean image packed in Linux environment (not by plugins) *******
original image: LT.Ninth.3-dm800.nfi
Patched enigma2: v4.0.0 by drhg
BootLoader for sim2: SSL-84D
Settings: Pre-adjusted
No deleted stuff
Image tested in internal and External Flash & all OK
***** E-Mail: drhg@hotmail.com *****
################################################## #######
Download
cheers
http://bbs.dreamoem.com/images/smilies/smile.png
drhg
-
Sim2-DM800-Newnigma2 v4.0.7 SIM2 #84d Jasper (2013-12-29)
Clean, no changes.
Sim2
SSL84d
Enigma2: ramiMAHER-tarball (thx)
################################################## ########## #############################
Webinterface is working.
Teletext is working.
################################################## ########## #############################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
################################################## ########## ############################
Download:
2013-12-29
Changes: Enigma2 (2012-11-18) patched
https://mega.co.nz/#!pBoRHTBZ!Zhlx_F...OVe26V1uNRYers
2013-12-20
https://mega.co.nz/#!AZxUTTqQ!dEPExj...wu4_JTNv5AnMQ8
Jasper
################################################## ########## #########
Newnigma2 team proudly presents:
Newnigma2 v4.0.7
################################################## ########## #########
Basics:
Enigma2 4.0: 18.11.2013
Enigma2 Plugins: 20.12.2013
Newnigma2 Plugins: 20.12.2013
DM 800 HD PVR
driver: 07.06.2013
secondstage: 84
kernel: 2.6.18
changelog E2 18.11.2013:
fixed greenscreen on cancel press during service/marker/bouquet rename
fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
fixed possible crash on screen close
fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
fixed possible ConfigLocations crash (typo)
changelog E2 12.11.2013:
added unicable support for jultec JPS0501-8
added possibility to rename services/markers and bouquets via channelselection context menu
small storage manager fixes
changes to support picons for remote services (partnerbox)
fixed possible epgcache crash
fixed now event epg query when no next event is available
fixed endless loop caused by wrongly encoded service names on 10E 11221V 27500
changelog E2 01.10.2013:
extend pid cache for audio types other than AC3 and MPEG
(required to store last selected ac3+ or aac audio tracks)
dont send CEC poweroff on idle to standby transition again
dont send CEC poweron on idle to standby transition
dont restart previous service on idle to standby transition
fixed rare crashes on e2 shutdown
call flush and fsync when storing parental control white/blacklist
Notice: Update from v4.0.x to 4.0.7 possible.
Changes:
Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: mediaportal
Added: swapmanager
Added: wget
Added: weathercomponent (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Update: Some improvements on our onlineinstaller
Update: znc to version 1.2
Update: openvpn to version 2.3.2
Update: german translation
Update: mediaportal to version 5.0.X
Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
Update: picon renderer. create piconSList dir for servicelist picons.
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
release changes from 4.0.0 to 4.0.6
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
-
GP3_OE2.0_dm800_SIM2_ssl84D_drhg_31-12-2013
######## GP3_OE2.0_dm800_SIM2_ssl84D_drhg_31-12-2013 #########
****** This is a Clean image packed in Linux environment (not by plugins) *******
Original image: dreambox-image-dm800-20131230.nfi
bluePanel: GP3 v0.77-r8
Cams: Gemini Cam feeds
Patched enigma2: v4.0.0 by drhg
BootLoader for sim2: SSL-84D
Settings: Pre-adjusted
WebInterface: Patched by drhg
Image tested in internal and External Flash & all OK
***** E-Mail: drhg@hotmail.com *****
################################################## #######
-
DM800 Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
Code:
######## Merlin-3_OE-2.0_dm800_SIM2_ssl84D_drhg_02-01-2014 #########
****** This is a Clean image packed in Linux environment (not by plugins) *******
Original image: Merlin-3_OE-2.0-dm800-20131231.nfi
Cams: Merlin-OE2.0 Cam feeds
Patched enigma2: v4.0.0 by drhg
BootLoader for sim2: SSL-84D
Settings: Pre-adjusted
WebInterface: Patched by drhg
Wireless: Patched by drhg
Add Basmala on starting up
Image tested in internal & all work 100%
################################################## #######
DOWNLOAD
cheers
drhg
-
GP3_OE2.0_dm800_SIM2_ssl84D_02012014
GP3_OE2.0_dm800_SIM2_ssl84D_02012014
* dm800
* Gp3 0.77-r8
* Enigma 2013-10-01--tarball
* Imagen experimental 2014-01-02
* Secondstage 84-r12.D
* DVB-modules 2.16.18-7.4-dm800-20131228-r
* Image cleam - No softcam
* Remove after installing all the languages to be used not (six more mg in flash)
**********************
Download
**********************
http://bbs.dreamoem.com/temalar/v_we.../paperclip.png Attached Thumbnails http://bbs.dreamoem.com/attachment.p...1&d=1388779495 http://bbs.dreamoem.com/attachment.p...1&d=1388779496 http://bbs.dreamoem.com/attachment.p...1&d=1388779497
-
DM800 Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
-
OpenPLi-3.0-beta-dm800 #ssl84d Dailybuild
Finaly OpenPLi 3.0 with SIM2 SSL84d and all original 20130607 drivers. No original PLi 3.0 for dm800 does exist, this is made possible by Athoik @OpenPLi forum.
This image also uses the alternative download feed server.
This image is a 100% build image from OpenPLi source, it uses all orignal 20130607 drivers which can run all plugins without patching.
You can use the update function, but if the PLi team switches to a new driver or ssl you may end up with a non functional box (which is an easy fix).
Check the Openpli Oe Core history[/URL] to be sure. You can find all Enigma2 changes here[/URL].
Features:
source: dailybuild
drivers: 20130607
bootloader: ssl84d
size:42.6 mb
Bootlogo:
standard bootlogo
Plugins:
No additional plugins installed, use the plugins menu and download with the green button.
Skins:
PLi-HD
Image flashing:
Be sure you have on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84d is included in the image !
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing
OpenPLi-3.0-beta-dm800 #ssl84d DailyBuild
Thanks to my friend Benkurd
-
OpenATV-3.0-dm800 SSL #84d by gjstroom
OpenATV-3.0-beta-dm800 #ssl84d
Click here to view the original image of 717x574px.
http://imageshack.com/a/img202/5943/cc27.png
This image is a 100% build from OpenATV source code, it uses all orignal 20130607 drivers which can run all plugins without patching.
You can safely use the online http://areadeltasat.co.uk/images/smilies/jTE05.gifate function, I tricked the driver date 100 years in the future so the present (and working) drivers are not overwritten during http://areadeltasat.co.uk/images/smilies/jTE05.gifate.
I added the secret-feed (softcams) and changed the default language to US. It's a 100% clean image !
Features:
source: 20140110
drivers: 20130607
bootloader: ssl84d
size:53,7 mb
Click here to view the original image of 717x490px.
http://imageshack.com/a/img19/5413/s867.png
Click here to view the original image of 717x501px.
http://imageshack.com/a/img534/7076/59nc.png
Click here to view the original image of 717x403px.
http://imageshack.com/a/img203/3919/cmyv.png
Image flashing:
Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84d is included in the image !
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing
OpenATV-3.0-beta-dm800 #ssl84d:
<-Download->
ps. pictures are not up to date and taken from a dm800se
Note: OpenATV uses a different remote keymap, you can change the mappings using: Menu - Setup - System - Button setup
Click here to view the original image of 717x508px.
http://imageshack.com/a/img834/9915/zfmv.png
