Visualizzazione Stampabile
-
Version 0.1.1.8:
-left double-click on icon in Systray displays the Monitor window,
-workaround for Trumanshare "wrapper" application, which sends TS data with an incorrect length,
-maximum value for ECMTimeOut option has been increased to 120 seconds,
-PMT PID is displayed within the Monitor window (just before the status of the PMT),
-decrypt cyphered subtitles when used as a DVBViewer plugin (DVBViewerAllAudio=1 is required),
-bug fix concerning Irdeto ECMs with a lots of ChIDs,
-TimeRecon option added, for re-connections. It is recommended not to modify the default value for this option.
In Upload
-
Version 0.1.1.9:
-minor modifications concerning the windows resizing,
- it's now possible to load up to 64 CCCam servers within Hadu.
But it's still limited to 6 active CCCam servers at the same time;
you can choose which 6 active CCCam servers within -up to-
the 64 possible ones,
- the maximum number of hops per node is now restricted to 8
(which is probably still too much from a reasonable point of view),
- an external -limited- tool called HaduSer has been created in order
to get a few infos from Hadu and to send it a few commands, for
Windows Vista/Seven and the DVBViewer recording service (and the
DVBLink TVSource service). See "DVBViewerRecServ" option within the
[Specific] section of Hadu.ini, and refer to the readme.txt file coming
with Haduser for more infos,
- several bug fixes concerning the Irdeto CAID and the way Hadu selects
the correct ChId for a channel,
- minor bug fix within the statistic computes for a node,
- a few modifications into the ECM process and selection,
- the way Hadu starts/stops CCCam servers within the DVBViewer recording
service has been modified. By default, session(s) with the concerned
server(s) is/are now only active when the recording is running: see
"DVBViewerIdleServ" option within the [Specific] section of Hadu.ini.
But you can still return to the former way (i.e. session with the server
always active) by setting this option to 1,
- workaround for non null messages 05 (Server ask) in case of CCCam server
version 2.1.2. Hadu will now stop and re-start the server session, after a
few ECM answers when having received this message.
In Upload
-
Version Beta 0.1.2.0
Changelog:
----------
0.1.2.0:
-bug fix for the "DVBViewerRecServ" option when set to 2 (always active),
-bug fix for incomplete server disconnections (if provoked by the server).
in upload
-
Hadu - v Beta 0.121
Changelog:
----------
0.1.2.1:
-bug fix for some incorrect connections in some cases.
In Upload
-
-Version Beta 0.1.2.2 in upload:pioneer 1420:
Changelog:
----------
0.1.2.2:
-Workaround for CCCam version 1.2.3. Hadu is now considered back as a 2.0.11 version client by default. Furthermore, it's possible to modify the client version sent to the server (see "Version" option).
-
Hadu - CCCam DVB plugin - version Beta 0.123
Changelog:
----------
0.1.2.3:
-EMM support (still experimental),
-possibility to indicate a static Node ID added,
-ECM process largely modified. If this new version doesn't work properly for you, get back to your former version,
-controls concerning the ECM provider completed,
-default value for the "WantEmus" option is now set to [0=No],
-memory occupation for each server lowered,
-several other bug fixes and minor enhancements.
In Upload
-
Hadu - CCCam DVB plugin - version Beta 0.124
Changelog:
----------
0.1.2.4:
-server build display added (Server Infos window),
-DCWsOneServ general option added (though it's not recommended to change it),
-several bug fixes concerning the connection step. The timeout value for connections is now 3 times the timeout value for ECM receptions,
-changes within the internal events process (clean up and bug fixes),
-NonStd server option added, relative to some CCCam server emulation (i.e. servers with a non standard CCCam server behavior, probably due to a modified software or an emulation). A warning is eventually displayed about possible such kind of servers in the Server Infos window,
-size for Monitor and Server Infos windows saved into Hadu.ini (if changed by the user),
-internal option NoDelay set back to a safer value by default (due to too many crashes or hangs with several DVB applications). You can now remove the "Nodelay=0" configuration line within your Hadu.ini file, if you've set it before,
-reinforcement of the received CCCam data controls,
-modification for the status of the CCCam servers when started (Monitor window),
-simplification concerning the ECM PID selection. If an ECM PID is now forced (using the ECM list into the Monitor window) and if the result is unsuccessful, a full standard retry then occur (i.e. using all the possible nodes and CAIDs, and respecting the priority rules defined). The "Cancel manual ECM PID selection" menu has been removed (no more used),
-support of the main CCCam "checks": commands 05, 0B, ... The former workaround for command 05 checks has been removed. The main check currently occurs after more than 2 hours (i.e. long session),
-a few modifications or adds concerning the informations logged,
-for users using also HaduSer, please upgrade to HaduSer version 1.0.0.2 (or else exchanges with this new version of Hadu is no more possible)
In Upload
-
0.1.2.5:
-several major bug fixes, mainly if 2 or more servers are used (but not only),
-correct support of the server rejection for the user connection. Possible error messages returned by the server are now displayed at the bottom at the Server Infos window,
-"IgnoreProvFor" option added, to ignore the provider checks for one or several CAID. It may be needed for instance, if the CAID tunneling feature (Betacrypt<--->Nagra3) is no more working properly in your case (set "IgnoreProvFor=1702" for the concerned server).
in upload :pioneer 1420: QUI
-
Hadu - CCCam DVB plugin - version Beta 0.126
-temporary workaround for OSCAM servers (see "OSCAMWa" option, and all the comments for it) added as a possible option,
-possibility to have only EMM active added (see "EMMAlone" option),
-the maximum number of providers per nodes has been increased to 40,
-possibility to update more than one card (i.e. node) of the same CAID for EMM purposes added,
-bug fix for nodes with too many providers,
-transparency for Monitor and Server Infos windows added (see "UseTransparency" option for more details),
-"IgnoreProvFor" option now also used for EMMs,
-providers are no more checked for Betacrypt CAIDs (ECMs and EMMs). So, you can remove your "IgnoreProvFor=1702" or "IgnoreProvFor=1722" option lines if you wish,
-bug fix for BetaCrypt EMMs process,
-bug fix concerning the DCWsOneServ option,
-bug fix for the emulator nodes recognizing,
-modification for the non standard CCCam servers and the corresponding "NonStd" option: it's now supposed to work automatically (see "NonStd" option for more details),
-bug fixes concerning different particuliar cases when several servers are in use,
-bug fix for incorrect behavior of server connections when the plugin is deactivated,
-bug fix because current ECMs were not sent immediately when a new server is activated (if several servers are active and at least one is OK),
-by default value has been changed for the MaxConnections and MaxECMPIDs options. You'll have to manually modify your current Hadu.ini file, if you plan to use these new by default values,
-number of active CCCam servers at the same time no more limited to 6 (but still limited to a maximum of 64 CCCam servers, active or not active). Set the new by default values for the MaxConnections and MaxECMPIDs options, if several servers are in use,
-bug fixes for a possible improper re-connection when the disconnection has been provoked externally (network and/or distant server),
-bug fix for Viaccess "long" ECMs (for TNTSat mainly),
-size for Monitor and Server Infos windows now also saved into Hadu.ini (if changed by the user) when pushbutton "OK" is pressed. Furthermore, the size of the columns for the different lists of these windows is now also saved,
-it's now possible to sort the nodes list into the Server Infos window for some columns,
-reject of null DCWs (processed as 'No decoding'),
-some other bug fixes and minor enhancements.
In Upload
-
...ciao a tutti... scusate... sono interessato a provare ad utilizzare hadu... possiedo una ss2 e la uso solitamente con dvbdream... volevo chiedere a voi esperti se esiste una guida, un tutorial, qualcosa che mi permetta di riuscire a fare "andare il tutto"... grazie delle risposte... magari anche in pm... ciao! by theralman....