Visualizzazione Stampabile
-
Enigma 2 per DM500
Suomipoeka ha realizzato un porting dell'enigma 2 sul DM500!
qui metto le istruzioni originali tradotte dal tedesco con google translate:
Consiste nel filesystem Linux root
l'immagine del kernel può essere utilizzato sia dal flash o caricate usando TFTP / BOOTP.
Estrarre il contenuto del pacchetto in una directory esportata (per esempio "/ tftpboot/dm500-e2") sul computer server NFS
Avviare il dreambox con una connessione seriale (115200, 8, n, 1) a un PC abilitato
Backspace Hit a "il boot loader di carico PPC" pronta e procedere con una delle seguenti configurazioni.
Semplice configurazione dei parametri del kernel init, solo NFS export / tftpboot sul server 192.168.0.1:
ip = 192.168.0.2:192.168.0.1:192.168.0.100:255.255.255. 0::: off root = / dev / nfs rw nfsroot = 192.168.0.1: / tftpboot/dm500-e2, v3, nolock console = ttyS0, 115200 tranquilla
Kernel i parametri di configurazione avanzata init, con DHCP + server BOOTP
root = / dev / nfs rw ip = dhcp console = ttyS0, 115200 tranquilla
In inglese:
Enigma2 port for DM500. Consists of the linux root filesystem,
the kernel image can be either used from the flash or loaded using TFTP/BOOTP.
Extract the contents of the package to an exported directory (e.g. "/tftpboot/dm500-e2") on the NFS server PC.
Boot your dreambox with a serial connection (115200, 8, n, 1) to a PC enabled.
Hit backspace at the bootloader's "PPC load"-prompt and proceed with one of the following setups.
Simple setup kernel init parameters, only NFS export /tftpboot on server 192.168.0.1:
ip=192.168.0.2:192.168.0.1:192.168.0.100:255.255.2 55.0::: off root=/dev/nfs rw nfsroot=192.168.0.1:/tftpboot/dm500-e2,v3,nolock console=ttyS0,115200 quiet
Advanced setup kernel init parameters, with DHCP + BOOTP server:
root=/dev/nfs rw ip=dhcp console=ttyS0,115200 quiet
Link per il download dal sito dell'autore,le dimonsioni eccessive (20mega) non permettono l'upload su gbcnet:
Codice PHP:
http://koti.mbnet.fi/devnull/suomipoeka/dm500-e2/root-dm500-e2-20100114.tgz
-
-
17.01.2010 Enigma 2 Imagen DM500
### Requirements
#
- DM500 is connected to LAN
- FlashWizard Pro for DM500 NFS multiboot
- NFS server on which FlashWizard can install images
### How to set it up
#
1. Flash an Enigma1 image that has a linux kernel supporting swapon (latest Pli Jade is good)
2. Boot the image you just flashed and when it shows the first dialog/window just leave it there
3. Setup your NFS server if needed (google "Ubuntu NFS server howto" if you don't know what that is)
4. Launch FlashWizard Pro and setup multiboot options
- Let FlashWizard install it's bootloader on the FLASH when it asks
- Disable HDD, USB and CF media for multibooting
- Enable NFS multiboot options (I used path=media/dreamhdd & IP=192.168.0.1 for 192.168.0.1:/media/dreamhdd share)
- Press autodetect (should show free space on NFS when connection to NFS server & DM500 are ok)
- Drag & drop the Enigma2 .fw2 file into the box in FlashWizard
- Let FW do it's job and when done just close it
5. Reboot your DM500 and select "Enigma2" from the bootloader boot menu
6. Wait 1-5 minutes for Enigma2 to boot up
7. When you see the Enigma2 setup wizard now for the first time, just leave it there (don't set it up yet)
8. Telnet into your DM500
- Create a swap file for the linux kernel on the NFS (YES, REALLY!!)
> dd if=/dev/zero of=/swapfile bs=1024 count=65536
> mkswap /swapfile
> losetup /dev/loop/0 /swapfile
> swapon /dev/loop/0
- Set the swap file to be enabled during bootup (modify /etc/enigma2/custom_script.sh)
9. Reboot your DM500 again to see that the swap file is in use after bootup
- Telnet in and run "free"
10. Done! You may now start setting up and using Enigma2
*** NOTE: Due to the swap you'll see the spinner / cogwheels the first time you enter Menu/Channel List/Movie List.
*** That will clear out quickly once the linux kernel has sorted out optimal memory / swap usage.
### Extra
#
I've disabled a few plugins by moving them to:
/usr/lib/enigma2/python/Plugins/Extensions/disabled
/usr/lib/enigma2/python/Plugins/SystemPlugins/disabled
To try them out just move them one level up from the disabled directory.
Download
-
ciao....ho provato a montarlo il backup e2...ma quando vado a creare il file di swap da telnet mi fermo perchè nn so la password......qualcuno la conosce???...Grazie!
-
la password dovrebbe essere quella impostata da te sul DM500, Username: root Password: Dreambox (è quella di default)
ti ricordo che se usi il DCC,quello che usavi prima con Enigma 1 non va bene,ti serve l'apposita versione per enigma2
:)
-
Citazione:
Originariamente Scritto da
magi1984
la password dovrebbe essere quella impostata da te sul DM500, Username: root Password: Dreambox (è quella di default)
ti ricordo che se usi il DCC,quello che usavi prima con Enigma 1 non va bene,ti serve l'apposita versione per enigma2
:)
ciao, la password del backup non è quella di default e sto usando il semplice telnet quindi non ha importanza che enigma usi........il problema è che nessuno ha provato a montare questo backup per cui se non sapete le cose precise evitate di andare a tentativi creando ancora piu confusione......cmq chiederò direttamente all'autore del backup suomipoeka.
-
ti ricordo che questo non è un lavoro ma un hobby per noi,per cui nessuno ci obbliga a provare tutte le news che escono e che noi riportiamo qui per HOBBY!
lavoriamo anche noi,oltre ad avere una famiglia,e non possiamo provare tutto ciò che esce sempre e comunque!
se non ti sta bene sei libero di cambiare forum!
-
Difatti...
io ho un negozio di abbigliamento intimo e prima di venderli mi provo tutti i capi...
devo sapere cosa do ai clienti:nokia 9701::nokia 9701:
PS: di solito con i reggiseni faccio un figurone:rai africa::rai africa:
-
tra l'altro ci tengo a sottolineare che le istruzioni riportate da True nel post 3,sono le stesse rilasciate dall'autore Suomipoeka;ne più,ne meno!
-
apparte la facile retorica con cui avete risposto.....non ho detto a nessuno che doveva per forza provare prima di postare (cosa che cmq riterrei utile)....ma che se uno risponde nn lo deve fare per sentito dire...ma perchè ha provato o perchè ha la risposta certa! Adesso tutti i forum postano sempre le stesse notizie e news.....ma nulla di piu....spesso test e prove sono inesistenti....ed una valanga di utenti che si trovano spaesati se qualcuno nn gli scrive lo script per fare tutto in auto o se nn hanno da scaricare dal pannello!!!ecco dove siamo arrivati...altro che hobby......ripeto non è rivolto verso voi in particolare.....ma son convinto che se era uscita una emu miracolosa tutti l'avrebbero provata, invece che di un firm sperimentale che fra l'altro richiede un po' di competenza per farlo......tutto qui.
Ciao....